0
What else can I help you with?
How do you put a lacrosse head on a lacrosse stick?
Normally the lacrosse head is screwed into the shaft. You can therefore use a screwdriver to unscrew the screw connecting the head to the shaft. once the screw is removed you will be able to remove the head from the lacrosse shaft
Can you pinch a lacrosse head wiht the stringing still on?
Yes 1. Pick 2 identical ends on each side of the head and run a string through them 2. make them really tight 3. Stick a 6 inch piece of wood on the top 4. Then take a hair dryer put it on full power and aim it on the sides of the head for 20 min 5. Put the head in the freezer for about an hour or two 6. take the wood and the 2 strings out then your done
How do you change your American girl dolls head?
you don't change yyour American girls head you can if you take the string that's attached to her head untie it and then lift it out of her body put it back in by slipping it innto the hole then tying the string
What if your lacrosse head is the same shape as your shaft yet a little small how to make it fit?
It shouldn't be small; it should fit. Take it to a speciality lacrosse store and see if they can make it work. If not call the company?
What lacrosse shafts does the answer pro fit on?
any head will fit on any shaft. It just might take a little elbow grease
How do you steal a ball from a lacrosse stick in girls lacrosse?
you check the head of the stick fast and quick to create a release of the ball and take it while it's in the air or ground. Be careful not to hit them though so no slashing. :)
Can you dye a Carolina blue lacrosse head pink?
yeah u got to take out the mesh bleach it so its white than die it pink
How can I extend the string on a Ryobi trimmer?
To extend the string on a Ryobi trimmer, you need to follow these steps: Turn off the trimmer and disconnect it from the power source. Locate the trimmer head and remove the spool cover. Take out the old string and cut a new piece to the appropriate length. Insert the new string into the trimmer head following the arrows for the correct direction. Wind the string evenly and securely onto the spool. Reassemble the trimmer head and spool cover. Test the trimmer to ensure the string is working properly.
What is the best way to repair a broken lacrosse head?
To clean a Lax head you take out all of the mesh and then bleach the head.
Can a harrow lacrosse shaft fit on a brine lacrosse head?
Yes, It may take a little bit of pressure, but it eventually will slide on. If you have trouble, run the throat (bottom part of head that connects to shaft) under some hot water, and then try sliding it on (this will soften up the plastic)
How do you pinch a lax head?
tie a string around the bottom of the head where you want to pinch it and put something in the scoop of the head so that stays the same. After you have your strings ready you need to take a hair dyer and warm the head for 20 mins where u want to pinch it. Then your done! take the stings off an the piece out of the scoop and you ready to play
How do you take grip off a lacrosse shaft?
no you cant
