How do you fix your tippman 98 custom?

Answer 1

First Remove the tank, barrel, feedneck and hopper. Then remove all of the screws that hold the two receiver halves in place. Remove one half of the reviver, then look near the back at the stock and back cap. lift up the stock and take the main spring and guide pin out. Then replace the stock with the original end cap, putting the guide rod and spring back into place. Make sure the detents, front sight spring, and trigger assembly or any other parts did not pop out. Reassemble the marker.

Answer 2

First you need to find out what the problem is. Before you assume it is the gun, check your tank and paint first. if you can not find a problem, but the gun does not work, take it to a shop.

Answer 3

Loosen the back screws, and pull if off.