answersLogoWhite

0


Best Answer

Yes, nearly all the players on the PGA tour use graphite shafted drivers and fairway wood and some hybrids, although they will normally use steel shafted irons. On the LPGA Tour and Champions Tour there would be a lot of graphite shafted drivers, fairway woods, hybrids and irons.

User Avatar

Wiki User

βˆ™ 15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

βˆ™ 14y ago

Graphite shafts are lighter and produce a higher loft angle, therefore are ideal for seniors juniors and ladies. Pro's don't use them because steel shafts are heavier and more accurate which is what you want in irons. They use graphite is their drivers and woods so they can get an ideal launch and raise club head speed.

This answer is:
User Avatar

User Avatar

Wiki User

βˆ™ 14y ago

Forgiving is a term that is only used for irons, woods and hybrids, it focuses around using the moi (moment of inertia) and centre of gravity to produce a good result from shots that aren't too well hit. What you may be thinking of, is are they more flexible and easier to get the ball in the air? In the case of graphite shafts, yes, they are a lot easier to get the ball in the air and more flexible.

This answer is:
User Avatar

User Avatar

Wiki User

βˆ™ 13y ago

I would literally go out on a limb here and say zero. I haven't seen a PGA Tour player using graphite shafted irons in about 5 years. KJ used to use graphite shafts in his irons around 7 years ago and they were an orangey pink colour, he is the last one I can remember.

This answer is:
User Avatar

User Avatar

Anonymous

Lvl 1
βˆ™ 4y ago

One third

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How many PGA Tour players use irons with graphite shafts?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Is boron shaft the same as graphite or graphalloy shaft?

Boron Graphite shafts are an Alloy of Carbon Fiber with Boron(Metal Element) Weaved along the side the carbon fiber strands. The best graphite Iron shafts ever made all have this in them, Some examples are the Yonex Tour irons that Phil Mickelson played, they had Yonex LTB-600 shafts(Low-torque-boron) and G.Loomis Tour shafts as well(G.Loomis also makes HIGH END fishing rods. Boron significantly improves the the tip and bend profile of the shaft and also makes it stronger, Boron significantly reduces the torque of a shaft, The Loomis tour's and Yonex ltb-600 shafts have lower torque numbers that TT Dynamic Gold steel shafts.


What is the difference between a set of standard golf clubs and a set of tour golf clubs?

Primarily price. The drivers players use on tour usually have a lot stiffer shafts and less loft.


In golf club irons is there a difference between graphite shafts and steel shafts and which is better?

It all depends on your swing speed and tempo, graphite is normally for a slower swing speed so you get more flex out of your shafts on the down swing. Go to a golf shop and ask to get your swing critiqued, they should be able to tell you what type of shaft you'll need for your swing. Hope that was helpful In my opinion, use steel for everything except possibly the driver. Steel is a lot cheaper and a lot more durable than graphite, and the advantages of graphite are pretty minimal. Steel shafts are also much more consistently manufactured, so you're more likely to get a consistent variation between adjacent clubs than with graphite. They also twist less under torque than even the best of graphite shafts. This means implies that you will probably get more consistent iron shots with steel than with graphite. Graphite shafts are lighter, so in principle a player should be able to generate a little higher clubhead speed with a graphite shaft. Getting a few extra yards out of your driver might be worth it. Probably not, though. A few extra yards down the fairway would be nice, but I'm more worried about staying IN the fairway. With your irons you don't care so much about maximum distance as accurate, known distance. If you hit every iron five yards further, you now have to hit a soft 8 instead of a normal 9. If you're that good, you probably already have a regular teaching pro, and you would have asked him. Take a specific 360 yard hole. With steel shafts, you hit a 220 yard drive, then a 7 iron to the green. With graphite, you hit a 230 yard drive, then a soft 8 iron to green. Assuming you hit both of them correctly, you're now on the green either way, but you paid an extra $100 for the graphite shafts. After hitting the graphite-shafted 8, are you now so much closer that you are more likely to one putt (or not three putt) than with the steel? Not likely. One possible exception to the above discussion is that graphite absorbs vibration better, so if you have sore hands it is said that it is a little more pleasant to play with graphite. Graphite shafts are manufactured a lot more consistent than you make them out to be. You should most definitely use a graphite shaft in your driver--if they weren't consistent why would Tour Pro's use them? It is also recommended to use them in fairways woods and/or hybrids unless you prefer the feel of steel. Well, NORMALLY if you a man then you get steel and if you a woman then you get graphite. But professionals (like me) get steel. With steel the club comes down harder giving the ball a tremendous power. Some men prefer graphite though because steel is hard to control. The first time I went to steel, i was hitting it horrible but now I'm hitting like a natural, future LPGA pro! Also if you like graphite better, stay with it, it's good to since it gives the ball a good WHIP. Have you seen Pro golfers slow motion back swing with the driver? I'm not sure if you have noticed, but the drivers shaft is amazingly bended which causes the club to make a WHIP which is a powerful thing so the ball can blast out for a hole in one! Graphite is usually 20-30% lighter than steel so you can indeed swing faster with less effort. Yes - cheap graphite has worse tolerance (even shaft wall thickness and even torque (twistiness)) than steel - which is bad. Good quality graphite is beneficial to most beginner to average golfers but lets get the cart before the horse. Most beginner to average golfers would do better to buy high quality steel ((True Temper Dynamic Gold Regular) and spend the money they saved on lessons and range balls.


What are the Most popular irons on the PGA tour?

What is the most popular irons used on the PGA tour ANSWER: I think it's the Taylormade R1 and Callaway drivers..


What is Taylormade Tp?

Taylormade TP stands for Tour Preferred. They are clubs aimed at better players, with things like smaller heads and more feel etc. There is Tour Preferred lines in drivers, woods, rescues, irons and wedges.


How many players are on the ATP tour?

There are 1,000 sanctioned players on the ATP tour.


What year was the Tommy armour 855s silver scot irons made?

Earlier than 1989 because I bought mine second hand then.


How many players from the Nationwide Tour earned their PGA Tour Card in 2005?

The top 25 players earn a pga card.


What are tour tennis rackets?

Tennis rackets used on tour, by the professional players


What pro golfer use Adam golf clubs?

Andrew KimballAndreas JohnsonAndrés RomeroJim FurykSergio GarcíaRetief GoosenSean O'HairDustin JohnsonStian LanggårdJustin RoseMike WeirDanny LeeJason Day


How many players on the PGA tour?

This year there is currently 230 players with full or partial tour cards.


Does the LPGA offer battlefield promotions for Futures Tour players like the PGA tour does for Nationwide Tour players?

No. In 1999 the LPGA established a new policy allowing the top three money winners of the Futures Tour to automatically get their LPGA "Exempt Status" tour card. There are not many events on the Futures Tour as the Nationwide Tour (19 in 2007)