a warrior head can fit on any shaft it might be a bit loose though and you might have to drill a new hole.
I am pretty sure it does because brine heads fit on warrior shafts, so they should be the same size
Yes I just bought a warrior shaft and a nike head and its great.
there are some gait ones that fit
It shouldn't matter. Any head should fit on any shaft
Usually yes but some heads may not be able to fit.
im not sure but what type of heads do you like, stx, brine, or warrior?
for the most part yes, so exceptions
Yes, I have a Warrior Mojo head on my Brine Swizzbeat Shaft and I love it. So if your going to try this out, then yes it will work.
you will need a tapered blade preferably a Dolomite blade
ya it should fit fine cuz i have the brine answer for a head and a warrior hero composite for a shaft. it works fine but im getn the brine swizzle shaft soon so ya
Heads are usually universal. You may have to drill a new hole in the shaft though.
No. It doesnt stretch far enough.
Any head will fit on any shaft. But if you but a head on a shaft that is a different brand than the shaft, you may need to drill a new hole into the shaft. The only exceptions are the STX Crankshaft shafts which need certain heads.
ANY BRINE SHAFT AND SOME WARRIORS (EX) WARRIOR DIAMOND
Yes, however you'll possibly have to drill a new hole
They're taper tip. The Apex shaft (red band) is a proprietary shaft with that company. A parallel shaft will not fit.
yes they do. i personally have a stiffi on a vanadium and it fits just fine.. you may need to put a piece or two of tape around the shaft under the head if its a little too small
well it may depend on the type of stx head or warrior shaft,,, usually they can but you may have to drill a new hole. i had an stx proton power on my warrior krypto pro, and all i had to do was drill a new hole.... hope this helped :)
yes, you can but you might have too put some force into putting it on the shaft because the shaft has differant ridges but it will still fit "legally".
Yes, all heads fit on all shafts, unless you have a Gait with a 10 degree offset head in which case only the TOS heads work on those
I don't know. It probably will though, because I have some old warrior head (I think it is the Savage) on the Sc21 and it works well.