Yes, I have a Warrior Mojo head on my Brine Swizzbeat Shaft and I love it. So if your going to try this out, then yes it will work.
ya it should fit fine cuz i have the brine answer for a head and a warrior hero composite for a shaft. it works fine but im getn the brine swizzle shaft soon so ya
yes, i have a stx head on a brine shaft. yes, i have a stx head on a brine shaft.
the brine clutch head will fit on any brine lacrosse shafts. I have the Clutch on my brine swizzebeat. i recommended this shaft its is light gripy and cheap. it is only 80 dollars
Right Now its the warrior Noz for the head and the warrior krypto Karbon for the shaft
a warrior helix lacrosse head on a warrior kryptolyte shaft please add me to your saved sellers on eBay i have awesome deals on the top lacrosse gear
im not sure but what type of heads do you like, stx, brine, or warrior?
well it may depend on the type of stx head or warrior shaft,,, usually they can but you may have to drill a new hole. i had an stx proton power on my warrior krypto pro, and all i had to do was drill a new hole.... hope this helped :)
any type of head except for a crank shaft head because it is bent. But any kind of head should fit.
Yes, however you'll possibly have to drill a new hole
Warrior Titan levitation as the shaft, STX proton power as the head
Normally the lacrosse head is screwed into the shaft. You can therefore use a screwdriver to unscrew the screw connecting the head to the shaft. once the screw is removed you will be able to remove the head from the lacrosse shaft
Yes, you just need to drill a ne hole(easy).
a warrior head can fit on any shaft it might be a bit loose though and you might have to drill a new hole.
i guess u could if it fits properly
It Can't, Every Lacrosse Head Should Fit On Every Shaft, Except A Goalie Head
I don't use warroior heads, i think brine are better. I would recomend the Brine clutch or clutch x if you are attack. You could still use a warrior sshaft though, even though i think that warrior sticks are better for defensemen.
Yes, It may take a little bit of pressure, but it eventually will slide on. If you have trouble, run the throat (bottom part of head that connects to shaft) under some hot water, and then try sliding it on (this will soften up the plastic)
You slide the head on the shaft and put a screw in the hole on the back of the head so the head will stay on the shaft.
yes, you can but you might have too put some force into putting it on the shaft because the shaft has differant ridges but it will still fit "legally".
try comlax in i think brantre...they have all your lacrosse needs