ya it should fit fine cuz i have the brine answer for a head and a warrior hero composite for a shaft. it works fine but im getn the brine swizzle shaft soon so ya
It shouldn't matter. Any head should fit on any shaft
Yes. On most sticks you can mix and match head and shafts.
I'm pretty sure any boys head will fit on any boys shaft and any girls head will fit on any girls shaft
to make the head not loose put a wine cork in the shaft and screw through that to keep ypur head in place
You put the head on put the screw in the hole and screw it shut. If your head is wobbly you can put a wine cork in the shaft and put the screw through the wine cork so it stays put
put the shaft in the freezer for 3 minutes and use a hair dryer and use it by, heating all around the throat area (where the shaft meets the head) of the head for 1 minute should go on easily after that
yes, you can but you might have too put some force into putting it on the shaft because the shaft has differant ridges but it will still fit "legally".
i guess u could if it fits properly
I would recommend that you do put a crank shaft head on a crank shaft. Putting any other type of head on a crank shaft could possibly break the head.
Usually you can fit any head onto any head, try the hot water trick: you put a cup of water in the microwave for 3 minutes, and then stick the throat of the head in for around 30 seconds. then you should be able to slide the head on easily!
Yes, you can use any head besides the STX duel head. If the head you use is too big for the shaft, put tape on the shaft until the head fits snug. If it is too big for the head, head the throat of the head with a blow dryer and slide the head on.