the stock tippmann X7 is literally the A5 with a different body, basically more plastic, and without the electric trigger. the X7 phenom is better than the A5 w/ egrip however because of its spool valve design and its ability to run full and burst on battery and semi without batteries.
yep, the a5 and x7 and 98 tippmann response trigger, it runs off air and can shoot full auto.
The tippmann A5 is supposed to be used in paintball.
It depends on the model of paintball marker you have, for example a Tippmann A5 in semi-automatic would come up to about 8BPS.
Tippmann A5 is a pneumatic gun or marker used for paintball. It is classified as a semi-automatic gun, with 0.68 caliber, a standard trigger, 8.5'' barrel length and more than 150 feet as range.
No, they will not both fit unless you have it custom fitted.
I believe it is a5/x7 threaded.
No. The Tippmann handle is screwed on from the bottom, where the bt is held on s rail.
No, It was not meant to anyways. The main Tippmann lines has the Tippmann 98 as their starter marker, the Tippmann A5 as their intermediate marker, and the X7/X7 Phenom as their top brand. The bravo one (alpha black in The United States) is simply a different looking Tippmann 98. The A-5 has the cyclone feed, and is much easier to take apart with a tombstone airline and push-pin disassembly.
On the ends of every barrel there are "threads" These are different for every series of guns. The Salvo marker has Tippmann threads therefore any Tippmann barrels can be use. Smart Parts also makes barrels for Tippmann markers. Actually the Project Salvo is a Tippmann 98 with a different body. It uses Tippmann 98 threads and any barrels that fits the 98 will fit the Salvo. The Salvo can use a A5 barrel if you add a 'A5 to 98′ adapter to convert the threads to the 98 style for your Salvo.
No it will not. the Handguard on the barrel is in the way of the handguard on the shroud.
The "tombstone" is what the gas-valve connection device on the Tippmann A5/X7. It is on the end of the steel hose, which is connected to the ASA or Air source adapter, where the tank is screwed in.
I am the captain of the Bullit Paintball team.Without the tank attached, my custom Tippmann A5 weighs between 3-5 pounds.