What are official regulations for a bat in softball?

Answer 1

According to the 1997 edition of the Official Baseball Rules: The bat shall be a smooth, round stick not more than 2 3/4 inches in diameter at the thickest part and not more than 42 inches in length. The bat shall be one piece of solid wood. NOTE: No laminated or experimental bats shall be used in a professional game (either championship season or exhibition games) until the manufacturer has secured approval from the Rules Committee of his design and methods of manufacture. Cupped Bats. An indentation in the end of the bat up to one inch in depth is permitted and may be no wider than two inches and no less than one inch in diameter. The indentation must be curved with no foreign substance added. The bat handle, for not more than 18 inches from its end, may be covered or treated with any material or substance to improve the grip. Any such material or substance, which extends past the 18 inch limitation, shall cause the bat to be removed from the game. NOTE: If the umpire discovers that the bat does not conform to (c) above until a time during or after which the bat has been used in play, it shall not be grounds for declaring the batter out, or ejected from the game. No colored bat may be used in a professional game unless approved by the Rules Committee At one time baseball bats were allowed to be flat on one side.

19th century bats were generally heavier and considerably thicker in the handle and had more of a gradual taper from the handle to the barrel about" 3 feet long, round, tapered and was to be between an inch and a half at the handle to three inches at the barrel. In 1857, the dimensions agreed upon were described as round, not to be more than two and one-half inches around in its thickest part and was to be no longer than 42 inches.

The National League made two major changes for 1885. It was now legal to have 18 inches of the handle wrapped in twine and one side of the bat was allowed to be flat. The American Association adopted this rule when they followed the same rules as the National League in 1887. In 1893, the bat was no longer allowed to be flat on one side but was required to be round. The length was still limited to 42 inches and the thickness of the thickest part was still two and on-half inches. The thickness of the bat was increased to two and three-quarters inches in 1895 and remains the same today.little league bats are 2 and a quarter inches and a pony league bat any size is leagle and a high school bat has to be a drop 3

Answer 2

You can have any bat out on the market now, but I would wait to purchase a new bat for another year because they will be outlawing composite bats.

Answer 3

Regulations state that a bat cannot be more than 3/4 inches in width at its widest point and no more than 42 inches in length.