Yes, just swap your bearings from skate wheels to longboard wheels, its all the same.
Buy wheels, trucks, and a deck and screw them together
It doesnt matter it should just fit
The shape of a longboard was invented before but the trucks and wheels were small like those of a skateboard. Early boards didn't have pop.
Longboard wheels have a small hub, or core, inside it. Skateboard wheels also have this. This allows you to put bearings inside of both of them and can interchange what trucks you put on it. Generally, longboard wheels fit on normal skateboard trucks but a problem you will encounter is wheelbite. You may need to sand the board for wheel wells or put big risers on your board. Another solution is buying harder bushings for less turn and lean.
The wheelbase is the distance between the front and the back wheels
It all depends on the height of your riser/shock pads.
I think it's a yes because the wheels won't stick out of the sides.yes they will
If the trucks use 8mm bearings (probably do, most of them do) then yes.
For the most part they should, unless the trucks say it needs 10 mm bearings then it will fit. Most trucks use 8 mm bearings.
yes , no problem. As long as there is sufficient wheel clearance so as not to get wheel bite. -- The above is correct and if you get any wheel rub from the longboard wheels use a pair of riser pads on your trucks with extended 1" hardware(if needed). It's a cool look on the flats. - VooDoo 13 -
nah losen u trucks just a little and do a heap of bert slide and 360 spins on ur board
A longboard or hamboard.