To replace a go-kart jackshaft, first, ensure the kart is safely elevated and secured to prevent movement. Remove the existing jackshaft by loosening the bolts or screws that hold it in place, and disconnect any attached components, such as chains or gears. Install the new jackshaft by reversing the removal process, ensuring it's properly aligned and secured with the necessary hardware. Finally, reattach any components and check for proper operation before testing the go-kart.
To change the jackshaft bearing on a 2004 Yamaha RX Warrior, start by removing the track and drive system to access the jackshaft. Next, remove the jackshaft from its housing by taking out the retaining clips and any fasteners holding it in place. Replace the old bearing with a new one, ensuring it is properly seated, and reassemble the jackshaft in reverse order. Finally, reattach the track and drive system, ensuring everything is secure before testing.
At a go kart place
Its 1100cc on a go kart :D
Where can I driver my go kart
There is no set speed anyone can tell you. Most engines are set at 3600 RPMs but it will depend on that and what size sprockets you are using from the axle to the jackshaft or clutch. Also, are you using a clutch or a torque converter b/c that will make a big difference as well.
This is a shop-n-go kart.
go to a go kart store or ebay!
The 4.0 liter OHV engine ( over head valve ) does not use a jackshaft ( 1991 to 2000 ) but all the 4.0 liter SOHC engines have 3 timing chains and a jackshaft
The Mini Beast.
A Superkart is the fastest kind of go-kart.
DON'T! It is dangerous!
a go-kart