Want this question answered?
Be notified when an answer is posted
yes it can i have done it
No a 125 frame is too small to fit a 250 motor but with a cutting torch and a welder anything is possible.
There may be clearance for the motor to fit in the frame, but you will have to modify the frame to bolt the motor into it. A main concern would be how the back of the motor lines up for the swingarm shaft to go through. Also will the carb intake boot line up with the airbox boot? A lot of questions you wouldn't know until you (or someone else) tries it.
1.9L Dual overhead cam 16 valve 125 hp
A 1997 rm 125 can go around 60mph.
Will a 94 rm 125 engine fit on a 2000 rm frame?
The yz 125 is better because 2005 and up have An aluminum frame and over all better. The kx 125 is ok but they made an aluminum frame in 2007. I would always go with yamaha
Sunset Beach - 1997 1-125 was released on: USA: 7 July 1997
on the frame
The TS125 engine will fit straight into the TS100 frame. My TS100 has a 125 in it and it rides very well.
Your 2003 Suzuki 125 motorcycle does have an automatic choke. The 2003 Suzuki was not equipped with a manual choke.
The serial number of a Yamaha Vino 125 motor can usually be found on the frame or engine of the scooter. The exact location may vary, but some common places to look include the following: On the bottom of the engine casing, near the center or rear of the scooter On the steering head, near the front of the scooter On the rear swing arm, near the back of the scooter On a metal plate attached to the frame, near the center of the scooter