Stx lacrosse heads DO fit on brine shafts.
No reebok does not fit with other shafts without adapter and some just dont fit
sure y not
the brine clutch head will fit on any brine lacrosse shafts. I have the Clutch on my brine swizzebeat. i recommended this shaft its is light gripy and cheap. it is only 80 dollars
Any head can be put on any shaft. All you have to do is put the bottom of the head in warm not boiling water, just warm tap water for a few minutes and it should slide rite on to your maverick shaft if it doesn't already.
Yes. In fact, any head can go on any shaft.
any head will fit on any shaft. It just might take a little elbow grease
ANY BRINE SHAFT AND SOME WARRIORS (EX) WARRIOR DIAMOND
it will fit on shafts make sure the shaft is mens and it's a little harder to put on a crank shaft. if this is a real problem take it to the nearest lacrosse store and ask them why and if i burned out of shape go to where you bought it and see if you have a warranty (most heads do)
Yes. Most head wil fit on shafts made by the same company
Heads are usually universal. You may have to drill a new hole in the shaft though.
a warrior head can fit on any shaft it might be a bit loose though and you might have to drill a new hole.
Yes, all heads fit on all shafts, unless you have a Gait with a 10 degree offset head in which case only the TOS heads work on those
No they fit all standard shafts.
I am pretty sure it does because brine heads fit on warrior shafts, so they should be the same size
no because some grips fit bigger shafts than others while others fit narrower shafts. This is the same with a putter, and woods.
Almost any shaft but on some you need to tape it on. All shafts fit on a brine clutch and the best shafts are totally preference
Any head will fit on any shaft. But if you but a head on a shaft that is a different brand than the shaft, you may need to drill a new hole into the shaft. The only exceptions are the STX Crankshaft shafts which need certain heads.
yes they do. i personally have a stiffi on a vanadium and it fits just fine.. you may need to put a piece or two of tape around the shaft under the head if its a little too small
any mens head can fit on any mens shaft. i put warrior, brine and gait heads on STX and harrow shafts all the time. the only thing that is different between different brands is where the screw hole is located but alot of people just tape their heads on their shafts anyway. i however are one of those people who like to screw their heads on their shafts but i have found that i can drill a new hole myself by using a 1/8 drill bit. it makes the perfect sized hole for the screw. please add me to your saved sellers on ebay, ihave awesome deals on the top lacrosse gear
yea i have 1 just like that
any Nerf manufactured bullets will fit.
yes most fit but some don't.