You buy 2x 3/8 weaver rail scope rings and attach them to the A5 rails. Then you put the scope you bought onto them, ensuring that they are level by looking through the scope at a level. Then you tighten the screws on the rings a little bit at a time to try to keep it level. Then your scope is mounted and ready for zeroing.
No, the Ion and A5 have different threads.
Yes. The A5 stealth comes stock with a top rail therefore a BT or Tippmann sight can be screwed on.
No, tippman uses 98 or a5 threads, mr1 has spyder threads.
Yes, scope mounts will work on the top rail, if they are tall enough to put the scope out of reach of the cocking pin and hopper mount,and on the side rails, although they are plastic. Offset mounts and risers can also be used on the top rail. They all have to be 3/8 dovetail mounts (standard for air guns) like the ones for Tippman A5 and 98c.
You would need to buy a magazine fed conversion kit as well as an air thru buttstock.
yes, it will not cycle as quick and my experience jamming, the effect if noticed even more if you have an RT trigger installed
A cyclone will not work on a Sonix, it is a specific Tippman Hopper
tippman 98 custom obvs
The front sight is secured by the top screw above the barrel, while the rear sight is secured in place by a screw just behind it.Check your manual, it may provide tips or have a troubleshooting guide.
Buy the Tippman they are GREAT markers. no match to a $2000 marker
Not without buying a barrel with under rails.
It can zoom up to 32 times normal range and can be adjusted horizontally and vertically.