0
First, you must purchase the tip leathers that you wan to use which should be of the same size (or larger if necessary) than the cue tip. This will be a 13 mm or 14 mm leather. Next, the old surface must be cleaned and lightly sanded to remove old cement. The new leather must be lightly sanded to provide a better surface for the cement. A strong cement (not a glue like Super Glue), such as Tweet's Cement should be used. Apply thinly to both the leather and the cue. Press the leather onto the tip aligning it evenly all around. Now the most important and hard part - the leather must be clamped into place on the tip end until as long as it takes the cement to set (see its instructions - Tweet's is not more than 15 minutes) - this clamping can be done with a bungee cord in a cue rack, or you can purchase a small rubber band clamp from a pool asscessories supplier. After cement has set, carefully use a razor to trim the excess glue. If the tip and leathe were the same size, you're done! If the leather is larger than the tip, you need to trim - there is a blade accessory you can purchase to do a very neat job of this trimming, without that, only a professional can finish off the tip properly.
Add your answer:
Earn +20 pts
What is the hardest ferrule that you can use on a pool cue tip?
Any material can be used as a ferrule on a pool cue, but not all materials can be used for the tip. G10 is a type of fiberglass and is the hardest that can be used for both the ferrule and the tip. There are also cues that have stainless steel or brass ferrules, but these cannot be used as the tip material.
Can you use a standard pool cue to break with?
Yes, and most people do so. However, if your cue has a medium or soft tip, as many cues do, this cushions the contact with the cue ball, and lowering the force of the break. In addition, it will lower the lifespan of the cue tip drastically. The advantage of using a dedicated break cue is to be able to use a very hard tip to get as much energy into the break as possible.
What is a pool cue?
The stick you use when you hit the ball in pool
What is a good pool cue for under 30. I am looking for a 2 piece cue with a 12mm screw on tip around 19-21 ounces. It doesnt have to be a professional stick just a nice one to use for recreational use?
Pool cues are typically 13mm, and you will not find a 12mm except for the more expensive cues. The best choice is a good used cue, but you can look for a low end new cue such as Viking or Adams.
Why use chalk?
it is easier to use. Chalk is an abrasive substance applied to the tip of a cue. It helps the cue tip grip the cue ball on off center hits(spin or English) avoing a miscue. Chalk should be applied to the tip before each shot.
How do you use tools for pool cue shaping?
Here is a site and an excerpt to get you started:The first thing you should do to your tip is shape it. If you don't have a shaper yet, you can use a cue file, but a shaper cube works best. This basically takes the hard edge away and gives your cue more precise tuning possibilities. With the hard edges, if your stick hits the cue ball at an angle, you lose your shot. With a rounded edge, you have a little leeway with your angle and get more shooting surface for the cue ball stroke.* http://www.zukunftjetzt.org/poolcuecare.htmlAnother site:* http://www.pooldawg.com/article/pooldawg-library/shaping-your-pool-cue-tip
Does the Billiards Congress of America have pool stick tip standards?
The BCA Rules require that the tip be 9 to 14 mm in diameter and the tip must be made of leather to perform a jump shot. If a metal ferrule is used, it cannot exceed 1 inch in length. However, BCA tournaments may use WPA Rules. In this case, there is no cue tip minimum and the cue tip must be of leather.
What to use to play pool?
you have to use a pool stick and 10 or 16 balls counting the cue ball
How do you spell poiculsticks?
It looks like you may be trying to spell pool cue sticks.You use pool cues to play a game of pool, similar to snooker. You do not need the word "sticks" at the end. A pool cue is what it is called.
How do you you use a snooker cue?
Clamp your cue on a flat surface with the bend going up, then apply controlled heat to warp it back straight. There is two ways that your cue has warped, one being dampness. As the damp gets into the cue the wood softens and bends, when it dries out the cue stays bent. Or the cue is exposed to a hot temperature, eg in a worm car boot also leaning it against a radiator.
What cue tip does Ronnie o'Sullivan use?
After problem with a cue tip during an important match (Graeme Dott), I heard that Ronnie had a chat with John Higgins and got recommended Talisman Cue Tips. As far as I know both John and Ronnie and a number of other pro players use them
Why are break cues in pool shorter?
Break cues in pool are typically 58 inches long. The bridge hand and the stroke determines what is needed for length of a pool cue whether it is for the break or for regular play. Most players use a break cue of the same length as the play cue.
