it is easier to use. Chalk is an abrasive substance applied to the tip of a cue. It helps the cue tip grip the cue ball on off center hits(spin or English) avoing a miscue. Chalk should be applied to the tip before each shot.
To help prevent the stick from slipping when it hits the ball. *Added - The chalk increases friction and is very important to be applied to the cue tip for anything other that a perfect center stroke to the cue ball.
The snooker cues have chalk on them, and when they hit the cue ball, some chalk may be left on it. The use of chalk improves the contact between the cue and the cue ball, increasing the friction. That helps to make better shots. The cue ball should be cleaned occasionally, which is what a referee will do during a frame and between frames.
Yes, and most people do so. However, if your cue has a medium or soft tip, as many cues do, this cushions the contact with the cue ball, and lowering the force of the break. In addition, it will lower the lifespan of the cue tip drastically. The advantage of using a dedicated break cue is to be able to use a very hard tip to get as much energy into the break as possible.
After problem with a cue tip during an important match (Graeme Dott), I heard that Ronnie had a chat with John Higgins and got recommended Talisman Cue Tips. As far as I know both John and Ronnie and a number of other pro players use them
A flat cue tip cannot hit the cue ball with predictable results. Cue tips are typically rounded to "nickel" or "dime" shapes. These terms indicate how round it is - with a dime shape being identical to the curvature of a dime, and nickel shpae somewhat flatter like the curve of a nickel. The cue tip in use by a good player when using much "English" will use the dime tip, as it will stay in contact with the ball longer than nickel shape. The nickel shape is more forgiving and an all around use shape, and is more common for most players.
most known and common cue used would prob be john parris but would say hunt & osborne,trevor white,craftsman cues and mike wooldridge are all equally on par and in alot of cases better!
This answer is subjective. Many people may say one, and other people choose the other. The McDermott Stinger can be purchased with a phenolic tip which can transfer more energy in the break than the hard leather tip. However, phenolic tips are not legal under some tournament rules. The Mezz Power Break is shorter and has very good weight adjustment. Both cues have their own methods to enhance the break shot by the technology used near the tip. Only personal preference can decide if one is better than the other. A solution is to have both, and use the pheolic tipped Stinger and move to the Power Break for tournament play.
Any material can be used as a ferrule on a pool cue, but not all materials can be used for the tip. G10 is a type of fiberglass and is the hardest that can be used for both the ferrule and the tip. There are also cues that have stainless steel or brass ferrules, but these cannot be used as the tip material.
Medium most likely. The soft tip is the best only if you know that you want very good cue ball control, using english, draw, and even masse. It is for the very experienced player and will not last very long, having to get replaced fairly often. If you use your cue for break shots, you should not have soft tip because full power transfer. A soft tip is usually given a dime tip. The medium tip will last and can give very good cue ball control. If using a medium tip, you now need to decide whether you want a dime or nickel shape. The dime shape keeps the tip in contact longer with the cue ball, allowing better cue ball control. The nickel shape allows the tip to simply last longer and is more forgiving. The cue with a medium tip can be used for breaking. The hard tip is for powerful shots, including a break shot, and will last a long time. The hard tip is most often used with a nickel tip and is common on house cues. The hard tip is forgiving but difficult for cue ball control for the average player.
Clamp your cue on a flat surface with the bend going up, then apply controlled heat to warp it back straight. There is two ways that your cue has warped, one being dampness. As the damp gets into the cue the wood softens and bends, when it dries out the cue stays bent. Or the cue is exposed to a hot temperature, eg in a worm car boot also leaning it against a radiator.
The leather tip needs to be slightly roughened to hold the pool chalk. A tip pick is tapped firmly into the leather, evenly and all around, to produce small dents into the leather to help it to hold the pool chalk.