A small size glove
I would at least go with an 11 inch glove and possibly an 11 1/2. The 9 inch gloves are really small and will not be usable in a year or two. I would recommend that you get a glove that is game ready....it is basically broken in for you. I do not typically agree with the charts out there that recommend the small glove for this age.
31 inch in our 9 & 10 yr old league
Depending on the year there is no glove box other then the front and side pockets the closest there is to a glove box is the back trunk which is also smaller in size
This depends on the position he plays. If he is a middle infielder (Shortstop or Second Base), you would want to get him a smaller glove to improve transfer of the ball from the glove to his throwing hand - about 9-10 in. If he plays outfield, the his glove should be much bigger to improve catching ability. This is about 11-12 inches. For a first baseman, buy a first baseman's glove (it will say on the tag) that is about 12 inches or longer. Third baseman's gloves should be about 11 inches. A catchers mitt is basically any catcher's mit you can hold up. Pitcher's should be around 10-11 inches with a thick web (pocket). If your player has never played before, he will probably be playing second base or outfield, and for him a large glove is recommended. For the average 13-year-old, a 9-12 inch glove is proper.
well i am 12 and i wear a medium in both gloves and hats.
im 13 and i wear a pair of 14oz lonsdales
I would go with a 9 inch or 10 inch glove. Wilson makes a good one:Wilson 9in Tee-Ball Glovehttp://www.hitrunscore.com/wta0200-dw9-mlb-wilson-youth-baseball-glove.htmlI got this glove as a present for my friends 4 year old son. It's the perfect size for little hands, but still high quality. Not like the plastic/vinyl gloves you get from the Walmart toy section.
Need year & exact model to answer.
if it is year model 1992-1998 it is behind the glove box. glove will need to be removed but beware, the filter panel requires a special tool to remove the special bolts holding it in place.
i would say size 6 or 7
Need to know what year and size the engine is that you are working on.