0
Add your answer:
Earn +20 pts
What is taper on a hockey stick?
The area near the bottom of the shaft where the width of the shaft decreases as it gets closer to the blade.
What is the lie in a hockey stick?
the curve from the shaft to the tip of the blade
Is a hockey shaft and blade as long as a onepiece stick?
yes
How do you remove wood from a hockey stick?
By applying heat to the shaft at the end of the stick where the wood is to be removed.
What is the bottom of the lacrosse stick called?
On the hockey stick, you have the shaft (the part you hold), and the blade (the part that touches the ice). In the blade, you have the Heel, which is the part connected to the shaft. Then you have the toe, which is the tip of the blade, or the end which does not connect to the shaft.
Can you reuse a broken hockey stick?
No, a player will get penalized for continuing to play with a broken hockey stick. Sometimes, a hockey shaft and blade are two pieces and can be replaced. Otherwise, you usually have to get a new one.
How can you increase the shaft length of your wooden hockey stick?
Not meaning to be facetious, but the answer is to buy a new, longer shafted stick.
The angle formed between the blade and the shaft of a hockey stick is 135 What type of angle is this?
Obtuse.
What type of stick hits a hockey puck farther?
This depends on the flex rating/capability of the stick shaft, the strength of the stick blade and the power of the player shooting the puck.
Can you put rubber sleeve on hockey stick?
Yes, Tacki-mac produces a rubber sleeve called a Command Grip that can be used for the upper shaft of your stick instead of hockey tape. They also produce a product called Attack Pad which replaces hockey tape for the blade of your stick.
Can all replacement blades fit into any hockey stick?
No. Some manufacturers taper the shaft to accept only their own blades.
Is the hockey o stick hollow?
the reebok o stick is semi hollow so to say. from about a inch above the "o's" or holes inthe stick there is black foam in the shaft and blade for support and strength. from there up the stick is hollow for the rest of the shaft. the reason behind the holes in the shaft of the stick is for weight savings and strength. if you look closely at the holes they are not perfectly round they are oval and that is for strength as an arch displase stress better.
