Wiki User
∙ 10y agoNo, the ball must be in custody of the opposing team for the shot clock to reset, and if the referee is watching it should really be a violation of the foot as you can't kick the Basketball, whether or not the referee decides to give you the ball or the opposing team the ball is questionable, it really should be yours because its the other teams foot that's violating however in some cases a referee may see that it was intentional and give the other team custody, so try and make it seem like an accident if your going to, but your best option is to just shoot the ball with any hope of it hitting the ring and you can run up and rebound it and start all over :) and its a 24 second shotclock not 14 :)
Wiki User
∙ 10y agoNone. It'll presumably never start unless you wind it first.
When winding the mainspring of a clock, mechanical energy is used. This energy is transferred to the mainspring through the winding key or crown, which tightens the spring inside the clock mechanism.
A self-winding clock works by using a mechanism that winds itself through the natural motion of the clock itself. As the clock operates, a small part of the energy produced is used to wind the mainspring, which powers the clock's movement. This eliminates the need for manual winding and ensures the clock continues running accurately.
14 Seconds
Mainly the older clocks only require winding because they are manual in operation.
Winding can be a present participle when it is used as a verb form (e.g., He is winding the clock). It can also be used as an adjective, such as in "a winding road," which describes the road as having twists and turns.
To start a clock that has stopped, first check if it needs winding or a new battery. If it requires winding, gently turn the key or knob in the direction indicated for winding until the clock starts ticking again. If it needs a new battery, replace it according to the manufacturer's instructions.
Mechanical energy is involved in winding the mainspring of a clock. When the key is turned or the winder is rotated, mechanical energy is transferred to the mainspring, storing potential energy which is then released slowly to power the clock's movement.
Energy in a clock is typically stored in a battery or through a winding mechanism. The battery provides power to run an electronic clock, while winding a mechanical clock stores potential energy through the tension in a spring, which is released gradually to drive the clock's movement.
To wind up a 3-hole Gilbert clock, first locate the winding arbor keyholes on the clock face. Insert the winding key into each keyhole and turn it clockwise until you feel resistance, indicating that the clock spring is fully wound. Be careful not to overwind the clock, as this can damage the mechanism.
Winding the mechanism that powers Big BenThe Great Clock is wound three times a week. First, the auto-winding mechanism is set. This winds the striking train and the chiming train. Then the winding handle is attached to the going train. This part of the mechanism must be wound by hand. When the winding handle is operated, 'maintaining power' is activated. This keeps the Great Clock going while winding takes place. Oiling the mechanism is part of the clock's regular maintenance to keep all its parts in working order.
8 days