To change the velocity on a Spyder EMR1 paintball marker, you will need to adjust the velocity screw located near the end of the bolt system. Turn the velocity screw clockwise to increase the velocity or counterclockwise to decrease it. It's important to chronograph your marker after making adjustments to ensure it's shooting within the legal speed limit.
Most people suggest you turn your velocity down and dry fire a few tanks to break in the spring. Any marker will shoot better after its break-in period.
It is the exact same velocity adjustment style as the Tippmann 98. One the side of the marker there will be a screw that goes into the gun. Get the hexagonal key that fits it and turn it in to decrease and out to increase. What this does is moves a screw physically in the way of the airflow of the shot, causing it to loose energy.
Check/replace turn signal flasher
Their is only one way to make a paintball marker shoot further. That is to increase the velocity to make the paintball travel faster, thus making go further. This however is prohibited by tournaments and fields. The maximum allowed velocity is between 300 and 275 feet per second. The only other way which only applies to Tippmann owners is the flatline barrel. This barrel puts backspin on the ball making it go a considerable distance further. The barrel is though inaccurate at longer distance. Contradictory to what most say a longer barrel won't make the ball go any further. You only need around a 12 inch barrel to provide adequate accuracy.And they hurt somewhat.
on the back of the marker there are 2 tubes, on the back of the lower tube there is an adjustment knob or set screw (depending on which exact model) turn it in for higher velocities, out for lower velocities
turn it on and tap the back. if it does not spin something is wrong.
The tds is activated/ deactivated with the remote attached to the key.
Behind A/C and heater control panel, in center console.
if it has a e-frame read the manual and it will tell you how to turn it to full auto, if it is a mechanical marker you will need to buy a e-frame to run it full auto
The velocity of the car was too fast for the sharp turn ahead.
If the car rounds the turn, then its velocity is not constant.Velocity is a thing that has magnitude and direction. The magnitude is what we call "speed".If the direction is changing, then the velocity is changing, even if the speed is constant.