Place woodblocks under the rear frame of the go-kart to raise it off the ground. Remove the belt guard by pulling out the cotter pin. Position the belt beside the clutches so that the arrow printed on the top is pointed toward the front of the kart. Wrap the belt around the clutch attached to the engine, then wrap the other end of the belt around the clutch. The belt should not make it completely on the second clutch. Rotate that second clutch while pushing the belt into position. It will slide on as the clutch rotates.
in a collar
yerf dog
The Yerf Dog company makes go-karts. Some of the go-karts for very young children were recalled in June, 2005 for irreparable safety hazards from breakages.
Should be stamped on th frame under the seat prefixed and ended with a *. What model makes a difference.
yerf dog is a good brand and if u can find them cheap on craigslist.
Loosen the 2 dog bones on the front of the engine and pull the motor forward to get to the back plugs.
Yerf dog go karts can go as fast as any other go cart. When you buy one you should look at the engine size. If your 6' and weight 220lb the you probably don't want a 110cc go cart. the bigger the engine the more power, torque and speed you get. If you want a fast go kart then i would get one with a 250cc engine. so yerf dog karts don't have a "max speed". There speed depends on the engine. What you really should be looking for is torque not speed. Ya going fast is fun but if your kart doesn't have enough torque to get you up to a good speed then what's the point. plus more torque gives you a better take off. If your kart has low torque, and if your one of the people that likes to spin the tires when taking off then your gona be in trouble. So before you buy, be shure to look all these thing up before making a decision. Hope this helped
Take it to your vet immediately!! It is toxic and not good for your dog.
by the dog in 1991
You cannot change your dog after you have named and bought it. If you mean get your dog from the dog hotel, then just press the Pick Up or Swap buttons.
The power for a dog walking machine is typically provided by an electric motor that drives the treadmill belt, allowing the dog to walk or run. Some models may also utilize hydraulic or pneumatic systems for power.
You will probably have to undo your dog bones and pull the motor forward in order to remove the plugs from the back of the motor, it's time consuming but it will work. This will give you more room in which to work. Hope this helps, bratt