bills pipe
No it won't only 1999-2002
No. You might actually get it to bolt on (doubtful) but 2 stroke pipes are tuned for each bike. A 250 pipe would change your low, mid range and top end power from what you have with a 125 pipe. For optimum power, you might check a Pro Circuit or FMF pipe for an RM 125.
Hi on my 1998 rm 125 its over the kick start ,under the exhaust pipe
erectile disfunction
The best exhaust for a 2002 Honda CR 125 often depends on your riding style and preferences. Many riders favor the FMF Fatty or the Pro Circuit Works pipe, as both options enhance power and provide a noticeable performance boost. Pairing these with a matching silencer can further optimize performance and ensure a well-rounded setup. Ultimately, selecting an exhaust should also consider sound regulations and personal preferences for weight and aesthetics.
yes it would fit but you need to change the exhaust flange at the front to a 1999 because 99 ktm;s have a concave outlet so the exhaust slips in i know cause i have a 99 ktm 125sx that am rebuilding and i have just purchased a 2001 exhaust flange to fit a 2000-2003 exhaust........simples
FMF Gnarly pipe and a Pro Circuit r304 silencer
The Suzuki RM125 is indeed a two stroke. This can be observed by the bulge in the exhaust pipe. This feature is only present on 2-stroke engines.
Yes, it will definitely fit. There are many good and cool after market exhaust pipes available for this bike.
It is possible to dissassamble exhaust pipes and remove the silencer pipe from inside the exhaust proper. This will, however, make the bike more noisy and thus illegal in many countries. Another way would be to buy other than stock, that is aftermarket exhaust pipes and mount them on the bike.
im looking for the gasket ring for my bike
take the back section of the exhaust off and you will find a narrow pipe inside that is capped of, you can cut the coin shaped blank off with a hacksaw and this should give you more power.