go to the brake calipers.. front or back wheel. undo the little bolt that the cable goes through, pull it tight and hold it whilst doing it back up again.. keep adjusting it until its correct.
Chat with our AI personalities
ruption bmx bikes are good but we the people are just a little bit better
no
10kg
0.1 KG its well light blud
To tighten your BMX brakes effectively, first adjust the barrel adjuster on the brake lever to increase tension. Then, use an Allen wrench to tighten the brake cable at the brake caliper. Test the brakes to ensure they are tight and responsive before riding.
its good for the price and the frame is strong but the brakes are weak
Tighten the stem
With cable ties or velcro band
To adjust BMX brakes effectively, start by loosening the brake cable using the barrel adjuster. Then, adjust the brake pads so they are aligned with the rim and not touching the tire. Next, tighten the brake cable until the pads make contact with the rim when the brake lever is pulled. Test the brakes to ensure they are working properly and make any necessary fine-tuning adjustments.
Use the appropriate socket on the nut and tighten it. Make sure the cable is in the correct position first.
loosen cable(bolt on either side of the support) adjust the cable using the bolts, then re-tighten
To tighten the derailleur cable on your bike, locate the barrel adjuster on the derailleur or shifter. Turn the adjuster clockwise to tighten the cable. Test the shifting to ensure it is working properly. If needed, fine-tune the adjustment until the shifting is smooth.