0
possibly, if you have the kind of hub where its solid and you can put on a single piece freewheel than no. But if you have the kinde where you need the single piece freewheel and a bolt to hold it on that yes. what you do is spin the thing that holds it on off and screw your nine piece driver it.
Add your answer:
Earn +20 pts
On a bmx what tooth freewheel do you need if you have a 28 tooth spocket?
you would need a cassette. it would have to be 10 tooth
What is better a 9t bmx freewheel or a 14t bmx freewheel?
It's not really a question of better, more of different. What decides how fast the top speed of the bike is, and how nippy it is off the start is the ratio between the tooth count of the crankset, and the tooth count of the freewheel. With a smaller freewheel you can have a smaller crankset, a slightly lighter bike and get the same feel of the bike as with a bigger crankset and a bigger freewheel.
Can you put a 23 tooth sprocket on a mongoose bmx bike?
Not a sprocket only, but you can buy a 23-tooth freewheel that should fit.
Can a 9 tooth driver fit on any bmx bike hub?
No. a 9T sprocket will only fit a cassette hub, and not freewheel hubs.
What size freewheel do you need for a 24t sprocket?
Unless by freewheel you mean driver (in which case 8-9) I haven't ridden bmx in a few years but last time I checked the smallest freewheel you could buy was 12 tooth which would make for quite a low ratio
What is the best method for removing a BMX freewheel without causing damage, and what specific tool, such as a BMX freewheel removal tool, would be recommended for this task?
The best method for removing a BMX freewheel without causing damage is to use a BMX freewheel removal tool. This tool is specifically designed to safely and effectively remove the freewheel without damaging the hub or other components. Simply attach the removal tool to the freewheel and use a wrench to loosen and remove it. This method ensures a smooth and successful removal process.
If you have a 22 tooth sprocket what is the correct size for your freewheel?
Usually the sprocket is an inseparable part of the freewheel, and the size of the freewheel is determined by the hub.
Will a 9 tooth freewheel work with a 28 tooth sprocket?
yes
Will a 12 tooth freewheel work with a 28 tooth sprocket?
Yes
Will a 14 tooth freewheel replace an 18 tooth freewheel or is something different?
Ok- the question was will it fit and the answer is NO. A 18 tooth freewheel has standard threads and will fit most any freewheel threaded hub. With one exception, the standard freewheel hub can accept 16 tooth and larger freewheels.Sometimes a hub also has metric threads on the opposite side and will accommodate metric threaded freewheels which are available in sizes 13 through 15 tooth. Your 14 tooth freewheel is metric and will only fit hubs with a metric side on them. Such hubs are generally termed flip flop hubs because they can use both types of freewheels.
What is a freewheel bmx?
There are two different hub designs for BMX, freewheels and freehubs. You need to know what you have if you want to replace the sprocket by the rear wheel.
Will a 9 tooth freewheel work with a 22 tooth sprocket?
they don't make a 9 tooth freewheel they make a 9 tooth cassette and its better to get a 8 tooth as you can see heres a gear ratio for you to look atPopular Gear CombosSprocketF/W or Cassette2282382592810301133123613391441154416
