replace the seals
Idk but you can buy one from paintballGuns.net to buy one that lasts a long time and p.s. Buy the jt cybrid paintball gun for only $37.99 (+ shipping and handling) and it's a grat deal!
eBay is the best way to sell
The sizes 9 oz and all the way up to 20 oz can be used for paintball gun. Some of the paintball guns are supposed to be used by the larger tanks. So the size of tank depends on your paintball gun.
It doesn't really matter what air system you have on your gun, it should fix the same way. Depending on the marker, you'll have to follow the manuals to dissemble it. The only air problem that could happen would be the CO2 freezing up in the regulator. The only fix is to set the gun down and let it un-freeze.
The spring in a mechanical paintball gun controls the amount of pressure the bolt has on it. Thus the more velocity. If you paintball gun will not shoot under 300 even when reg is way down, you may need to cut a little bit off the spring, 2 or 3 spirals.
If You Go On The Little Big Planet Shop On Little Big Planet On The PSP There Is A Pack Called: Metal Gear Solid Pack. The Paintball Gun Is Included In The Pack. That Is The Only Way To Get The Paintball Gun. P.S The Metal Gear Solid Pack Is £4.99
They are the same thing, just different ways of calling it. Players will most likely call them Markers because that is their proper name. But gun works either way. The creation of the term marker was designed to indicate that a paintball marker is not designed to be a weapon.
ACT stands for anti-chop technology. Sometimes in a paintball gun the paintball does not fall all the way into the chamber. If the ball isn't all the way in and the bolt is pushed forward it can "chop" the ball in half. Anti chop technology can sense when the ball doesnt move and stops the bolt. Break beam eyes do the same thing but are more expensive
you may need to clean the gun parts that the ball passes through or you may need to buy an anti chop bolt. Also your velocity may be to high.
Paint balls. the hurt way more, and the paint its self can do some damage too
Eye's on a [aintball gun, make sure that the ball is all the way in the breach before you can fire. It stops you from shooting when there are no balls, and keeps them from breaking b being hit with the bolt halfway into the correct spot.
The best way to fix a leaky bathtub stopper is to first identify the cause of the leak. This could be due to a worn-out gasket or a loose connection. Once you have identified the issue, you can either replace the gasket or tighten the connection to stop the leak. If you are unsure how to do this, it is recommended to seek the help of a professional plumber.