You mix 2 stroke oil with your gas, slosh the can lightly to mix it good, then pour it in your gas tank. The proper ratio will depend on what type of oil you will be using for your premix. The oil base stock is either petroleum, semi-synthetic or synthetic oil and is mixed with gas at a ratio ranging from 16:1 (petroleum) to as high as 100:1 (synthetic). My 2 stroke I have is a 2001 Kawasaki KDX200 that I run Yamalube 2R at 36:1 with no problems. Although synthetics say you can mix them at 100:1 I would not, that seems way too lean to me.
2 stroke but u dont have to mix the gas and oil on early models they are oil injected
standard 2 stroke oil snowmobile or dirt bike oil
it will take any 2 stroke oil just mix it with petrol with a ratio of 25/1
high quality suzuki oil 40:1
Where is it leaking from???
10w 30
The oil to gas ratio for a Suzuki DR 80 would be 1:32. This means that for every gallon of gas that is added, 4 oz. of oil must be added as well.
a stock rm 80 two stroke liquid cooled has 29.5 hp and a modded out rm 80 has around 32-36 hp
50:1
550 ml
I'm assuming it hasn't changed too much - I have a 1988 DS 80 and you take off the seat and you will find the oil reservoir there (the little tank with a cap on it) You need to use 2 stroke injector oil that you can get at any bike shop.
If it is a 2 stroke use 80/90. Weight gear oil. If its 4 stroke run what specified on the engine