0
What else can I help you with?
When measuring the height of a basketball rim do you measure from the top or bottom of the rim to the floor?
The measurement of 10' refers to the distance from the rim to the ground.
What is the distance from the bottom of the backboard to the rim?
6" . A STANDARD RECTANGULAR BACKBOARD IS 42" HIGH. THE TOP OF RIM IS 36" FROM THE TOP OF BACKBOARD, SO THAT LEAVES 6" FROM THE BOTTOM OF BACKBOARD TO TOP OF RIM.
Did you measure at the top of the meniscus or the bottom?
You measure at the bottom of the meniscus.
How do you measure a Plastic bag?
top to bottom
Top is to roof as bottom is to what?
ground or base
Do you read a buret from top to bottom?
No, a buret is read from bottom to top to accurately measure the volume of liquid dispensed.
How do you measure scaffolding?
With a tape measure. You asked. Outside to outside, top to bottom.
When you measure a pie pan do you measure at the top where it's wider or at the bottom?
you measure at the top. Typically, pie pans are 8 or 9 inches.
How to measure bike frame size accurately?
To measure bike frame size accurately, stand over the top tube with your feet flat on the ground and ensure there is 1-2 inches of clearance between your crotch and the top tube. Measure the distance from the center of the bottom bracket to the top of the seat tube to determine the frame size.
How do you measure the distance around an egg?
You measure around the middle not around the top and bottom.
What type of outsole is on the Asics Top Seven?
The bottom of the shoe is made out of rubber on the Asics Top Seven and it is easy for the shoe to stick to the ground. Any running shoe that you get that is for running will have a bottom that sticks to the ground.
How do you adjust the torsion bars on a 2 wheel drive 1993 Toyota pickup?
Lift the front of the truck up, get a 22mm wrench. The adjusting bolts are towards the middle of the car. tighten them to lift and loosen to lower. Lower it back on the ground and measure the distance from the top of your rim to the bottom of your fender. Keep adjusting till you get both sides even.
