0
Best is simply to try harder, borrow better tools. If you're really desperate they can be cut off with an angle grinder, but it will take some time and require a bit of skill.
Wiki User
∙ 13y ago
Wiki User
∙ 13y agoA socket wrench, an extender, and the appropriate socket.
Add your answer:
Earn +20 pts
How do you remove the bolt on a flick trix bike wheel?
turn a tool
Can you use pegs instead of paddle pop sticks for french knitting?
Yes, so long as the pegs are secured into the hand-tool.
How do you remove the top on a 96 Corvette?
Remove the 4 bolts at each corner of the top with the supplied tool that should be in your console. If the tool is missing, seek a replacement.
How do you remove the ms removal tool?
Right then, if you want to remove the MS removal tool, follow this link: blog.teesupport.com/remove-ms-recovery-tool-virus-fake-ms-recovery-tool-manual-removal-guide Follow the steps correctly and it should be removed from your computer.
How do you remove spare tire on Dodge ram without tool?
If you don't have the tool a 13mm socket should work
Can you ride a bike to Tibet from Chengdu what things should be taken or what should you prepare for the trip?
When you ride a bike from Chengdu to Tibet you need a spare tube, tire levers, a tool box , cell phone and a pump.
How do you cut i bike chain?
To remove a bike chain, there is a special tool called a chain break tool, available at bike shops. What this tool does is push out a pin holding the links together. In an emergency, you could possibly use a vise to hold the chain, and a small nail punch to push out the pin. Using the tool designed for the job is much easier. If you are replacing links in the chain, or putting a new one on the bike, the tool can be used toreinstall the pin. Be careful when you push the pin out, that you don't push it completely out of both sides of the link. You want the pin to remain attached to one side of one link, or else you will spend a lot of time getting the pin reattached The tool can be somewhat expensive, so ask how much the bike shop would charge to remove the old worn out/rusty chain and install a new one. Refer to SheldonBrown.com/chains.html for more information and pictures to explain chain removal.
How do you remove koobface?
To remove koobface you should use a virus removal tool such as COMODO Cleaning Essentials or MalwareBytes.
What should be done before adjusting or cleaning a power tool?
Remove it from the power source.
Where can someone buy a bike tool kit?
There are plenty of online sites where someone could go to and purchase a bike tool kit. These online sites include Amazon, eBay, Bike Radar, and many more.
How do you remove wheel center cap of a Cadillac xlr?
If it is like the Deville models, you should have a special tool that will remove the center bolt. The owners manual will have a picture of this tool. Use the flat edge of the tool to remove the center decoration, and then use the rounded end to remove the center bolt. The hub cap will then basically fall off.
How do you remove front break rotors on a 1984 4 wheel drive ford f250?
There is a special tool to remove the wheel hub cap, it is basically impossible to do without it. Go to a tool store and ask them what tool it is, they should know what you're talking about
