0
turn a tool
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you remove a wheel bolt on a 2002 Tacoma?
you need a tacoma wheel bolt wrench or some plastc expolsive.
How do you remove steering wheel on frontier?
Disconnect battery. Remove air bag. Remove bolt holding steering wheel to column. Use a steering wheel puller to remove wheel from column.
How do you remove the steering wheel on a 1984 Mercedes 300?
To remove the steering wheel on a 1984 Mercedes 300 you first need to remove the Mercedes logo in the center of the wheel to access the bolt holding the wheel in place. A 10mm allen socket with a 6-inch extension is needed to remove the bolt.
How do you remove the rear wheel from a 1989 Suzuki Fa50?
The front wheel is removed by unscrewing the nut from the wheel bolt. The bolt can then be slid out. Take note of the spacer location and orientation between the fork and the side that had the nut (opposite side of brake assembly) for proper placement during installation. The wheel can then be removed from the forks. The brake assembly should just slide out of the wheel center, if it does not loosen the brake cable adjustment nut in the center of the wheel to release pressure from brakes. To remove the rear wheel you must first remove the exhaust pipe. There are two small bolts under the bike where the pipe connects to the engine. There is one more larger bolt directly below the air filter. once the exhaust is out of the way you remove the cotter pin from the castle nut on the right side of the bike, then remove the castle nut. The brake assembly on the rear wheel stays attached to the bike and the wheel slides off of it. Loosening of the brake cable adjustment nut may be required. Sometimes a few light whacks with your fist on the left side of the wheel may also be required if your brake pads have worn a groove in your wheel.
Remove rear wheel of gl 1200?
Interstate/Aspencade, quote from my shop book.......... Bike On Center stand, remove the four left saddlebag mount bolts and 2 nuts. remove the reflex reflector from the rear fender, remove the left saddlebag and rear fender. remove the rear bumper by removing the four bolts and retainers. remove the axle nut and RIGHT shock absorber lower mount bolt. remove LEFT shock absorber lower mount bolt. Remove the axle pinch bolt. Raise the rear wheel with a block large enough that the axle clears the muffler. Remove the axle and move the caliper assembly outward to allow removal of the rear wheel. Remove the rear wheel : Note: Do not depress the brake pedal while the wheel is off. Good luck.
How do you remove a steering wheel on a Nissan truck?
remove s.w.cover ,remove bolt,use s. w.remover
How do you remove rear wheel of Honda activa?
unscrew(with machine) the center bolt and remove tyre
How do you remove the steering wheel in a ford capri?
big bolt cutters
How do you change a class 8 truck steering wheel?
Usually, the bolt to remove the steering wheel from the column is located at the point where it attached to the column. If your steering wheel has a pressure switch for the city horn located in the center of the steering wheel, you'll have to remove it to access that bolt.
How do you remove alloy wheels?
Alloy wheels are typically fitted with standard Hex head bolt in the majority of cases, but with one bolt hole containing a specific "locked" wheel bolt. This bolt will usually require a special adapter for your wrench to remove. This should be supplied with the wheel/car/bolts when purchased.
How do you remove the ignition switch in a 87 Chevy s10 that does not have a tilt wheel?
remove the steering wheel, then the turn signal lever and cam. you will then see a small bolt down in the right hand side of the column, remove the bolt and pull out the ignition switch. GOOD LUCK!
How do you remove steering wheel Econoline van?
It is hard to remove a steering wheel by hand. A person has to use a steering wheel puller to remove the steering wheel. It applies pressure to the middle with a screw/bolt and it pulls the rest forward.Ê
