0
What happens if you tighten the nut all the way on a skateboard.?
Wiki User
∙ 12y ago
If you do that the trucks wont turn, wheels wont rotate, and the board will get stress fractions from the nuts being to tight so you probably wont be going anywhere
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How tight do tighten your skateboard wheel?
on the inside of your wheel there is a little nut screwed to the bolt on the trucks, use a wrench to tighten that
How do you tighten trucks on a skateboard?
There is a large nut on the bottom of the trucks. Twist that clockwise using a wrench. That will tightan our trucks.
How do you tighten the steering?
To tighten the steering you just tighten the nut under it and then your done. NICE
How do you tighten an aircraft nut?
The same way you tighten any other nut. Use the appropriate tool to the recommended specifications.
What can you do with a nut driver?
Tighten the proper size of nut. Or loosen same.
Which tool is sometimes called a nut driver it is used to tighten nuts is the some way that a screwdriver tighten screw?
A wrench is used to tighten nuts. Socket wrenches are a type of nut driver.
Wipers stop working in Renault scenic?
A problem we found was that the nut holding the wiper in place had come lose all we had to do was tighten the nut and the wipers worked
How do you tighten a stripped nut on a battery post?
Best just to remove the nut and replace it with an new one, or grab a pair of pliers and tighten it that way if you absolutely need to.
What's the Spindle nut torque for 2wd 2000 ford ranger?
while turning rotor ccw, tighten nut to 17 ft/lbs.loosen nut and while turning rotor cw do a final tighten of 17 in/lbs
Why does one of your rocker arm bolt keep backing off when you tighten it down?
dont worry about why, just take another nut with same threads and tighten it on top of the existing nut
How do you tighten ac belt in Chrysler 300 2004?
You loosen (1/2 turn) the 15mm nut that locks the idler pulley. Then from under neath you turn the 13mm bolt that will tighten and loosen the belt. Be sure to tighten the lock nut when done.
How do you increase pressure on a pressure reducing valve?
Loosen the nut on top. Tighten the screw clockwise to increase, counter-clockwise to decrease pressure. Tighten the nut back up. Done deal
