The 3-foot line prevents a batter from interfering with a fielder who is trying to catch a ball, as a batter must stay within that line while running to first. If a batter runs outside the line and bumps a fielder to prevent them from making a catch then it's interference, so the batter must stay inside the line. However, batters usually run outside the 3-foot line if they intend to continue past first base on their hit, but it's only called interference if they truly interfere with a fielder... for example: if the ball was hit to left-field and he runs outside the line, the umpire does nothing, as the player fielding the ball is over a hundred feet away from the line.
NO, he is normal.
The circumference of circle with 60-foot diameter is: 188 feet.
5 feetThere's 12 inches in a foot, so 60/12=5.1 foot = 12 inches. You now have all the information required to work out, for yourself, the answer to this and similar questions.There are 12 inches in one foot. Therefore, 60 inches is equal to 60/12 = 5 feet.60 inches are 5 feet.60 inch = 5 feet12 inches in a foot so, 60/12= 5 feet5. 60 in. \ 12 in. in a foot = 5 ft.There are 12 inches in one foot. Therefore, 60 inches is equal to 60/12 = 5 feet.Five feet. (there are 12 inches in one foot).Answer5 feet5 feet60 inches = 5 feet ( 12 inches = 1 foot) 60 divided by 12 = 560 inches/12 inches in a foot 5 ft.
The volume of a 60-foot cube is: 216,000 cubic feet.
60
There are 12 inches in a foot. Four foot is 48 inches, five foot is 60. Sop, between 48 and 60.
60 x 30 = 1,800 square feet
60 square feet is an area equal to that of a ten-foot by six-foot rectangle.
I have coached a lot of youth baseball, and most kids run from home to first in about 3.7 seconds. Faster kids are under 3.5, and slower kids don't break 4 seconds. That's on 60-foot bases.
Depending on whether or not you got a running start (this affects your body's velocity) you would be falling between 40 and 45 mph.
First draw a horizontal straight line a b Put compass point on a (open compass approximately half the length of line a b - note: ensure the compass is not altered throughout the following). Draw an arc that cuts line a b at c. Put compass point on c and draw an arc from a to cut the first arc at d. Draw a straight line through a d to form a 60 degree angle. For a 120 degree angle, put compass point on dand draw an arc from a to cut the first arc at e. Draw a straight line from a through e to give a second angle of 60 degrees: 60 + 60 = 120 degrees.