answersLogoWhite

0

How does the pins work?

User Avatar

Anonymous

7y ago
Updated: 9/1/2021

The safety pin has a pin that goes into the head of the pin, and you push the point in or out of the head of the pin.

User Avatar

Adonis Herman

Lvl 10
3y ago

What else can I help you with?

Related Questions

Can Processor work with pins missing?

Micro Processor is the main processing unit of the computer. It is call Central Processing Unit. If pins are broken, it will not work.


When a DIMM has chips on both sides of the module do the pins on one side of the module work independently of dependently to pins on the other side of the module?

Thay work independently.


When a dimm has chips on both sides of the module do the pins on one side of the module work independently to pins on the other side of the module?

no


How many pins there is in a SVGA connection?

A cable that converts VGA to RCA has 19 pins. The VGA cable has 15 pins, 3 pins are in the center of the RCA jack, and one pin is unused. This will work to convert an older tv to work with newer cable services.


What are pin terminals?

Terminals (connectors) which work by inserting pins into holes.


When a DIMM has chips on both sides of the module do the pins on one side of the module work independently or are they dependent on pins on the other side of the module?

independently


When a dimm has chips on both sides of the module do the pins on one side of the module work independently or dependently to pins on the other side of the module?

independently


When a dimm has chips on both sides of the modules do you the pins on one side of the motherboard work independently or dependently to pins on the other side of the modules?

Independently.


When a DIMM has chips on both sides of the modules do the pins on one side of the module work independently or dependently to pins on the other side of the module?

independently


How do you remove and install king pins?

You don't. Take it to a shop that does suspension work.


How should you throw the ball to maximize the amount of work it does on the pins?

To maximize the amount of work the ball does on the pins, you should throw it with a combination of speed and precision, aiming for a direct impact on the pins. A higher initial velocity increases kinetic energy, while targeting the pocket (the area between the 1 and 3 pins for right-handers, and the 1 and 2 for left-handers) optimizes the transfer of energy. Additionally, a slight rotation can enhance pin action, causing them to scatter more effectively. Overall, focus on a powerful, accurate throw to maximize the work done on the pins.


You are trying to pick a padlock but the pins stick to the top with the slightest tension How do you set the pins for this?

try it a few times and bend it slitly every time it doesnt work