Spyder style paintball marker work with a stacked bolt design. on the top they have the bolt that pushes the paintball forward and has gas fired through it, and on the bottom a striker that opens the valve. These two move back and forth, powered by the gas inside when the trigger is pulled.
It's a spyder clone. So youtube up some how-tos on spyder maintenance
As long as it has the correct barrel threads it will. JT markers are spyder threaded, just make sure the barrel has spyder threads and yes it will work.
Most likely the striker o-ring is broken or needs to be lubricated. It could also be that the sear is work, or the mainspring could be worn. Take it to a local paintball store to have it looked at.
There is no Spyder III.
Yes. Standard 9oz through 20oz CO2 tanks work perfectly with the MR1. Compressed air paintball systems work fine too, with a regulator.
No, no paintball guns work on hydrogen.
Yes, they accept all spyder threaded barrels.
yes. I have it on mine. Very easy to install
Firstly check if your tank still has pressure. Secondly if it uses batteries, check that they are full. If that does not work, completely disassemble and clean and re-lubricate your gun. Then take it to a shop if this continues.
18
1.
Paintball stores usually wont hire anyone under the age of 18.