yeah, theyre for skateboard and scooters
a skateboard has 8 bearings. 2 bearings inside each wheel facing opposite ways inside each wheel
yes there the same bearings for every skateboard
umm you need 2 for each wheel so 2x4 = 8 so 8 bearings but they come in packs of 8, :)
Rocknrons speed bearings are good.
Yes, scooter bearings are the same as skateboard bearings, but I would not recommend getting them.Yeah, in fact.. It's a smarter decision to buy 'SKATEBOARD' bearings over 'SCOOTER' bearings because, for the same price, you get 8 with the skateboard, and 4 with the scooter.Essentially, you'd get 2 sets of Bones Reds (best value) for your scooter, which only needs 2 bearings per wheel, at 20 bucks max.
the skateboard is made of 1. the deck 2. the trucks 3. the wheels 4. the bearings. do u need me to explain every part? cuz i will
Unbolt your wheels first, you will need a small socket wrench for this. Then push or pry out the bearings, there are two per wheel. Press in the new bearings and bolt it up again, but not too tight so as not to squeeze the bearings.
depending on your bearings
Use WD-40 i use it on my scooter bearings and they are the same as skateboard bearings as well if you want them to go faster soak them in the stuff for 2 days and then dry with a towel
Bearings are used to let the wheels spin freely and with minimal drag.
Probably not considering they're roller blade bearings
It's not actually the size of the skateboard that matter's, its the ball bearings the wheels have inside them. Cheap bearings that come with cheap walmart/warehouse boards almost always go slowly, were as proper bearings from your local skate shop will go a lot faster.
Yes, if you purchase or have any skateboard trucks they will fit any wheels. the bearings are the part that actually connects to the trucks. the bearings go in the wheels; the wheels with bearings go onto the trucks and are bolted on. -- everyday skater Blaze
pop them out of the wheel
it depends on were you live.
Griptape,deck,trucks,wheels,bearings,hardware which would be bolts nuts etc.
Two bearings hold each wheel of a skateboard to the axle. These bearings are generally made out of steel. On some more expensive models, they may be made from silicon nitride, which is a ceramic.
All skateboard bearings will fit ANY sized skateboard wheel because the bearing hole is designed to be the same in all wheels.
Bones Reds, Tensor
riding on bearings