You put the club in a rubber vice and tighten. Then get a Stanley knife with a hooked blade, put it at the bottom of the grip and pull the knife towards the butt end of the club. You then use some grip solvent or white spirit to remove the old grip tape. And then you can start putting on your new grip.
i have a Winn type of grip and it works great
To be honest, i wouldn't bother. You can use white spirit or petrol and grip solvent is cheap enough.
You can either use white spirit or petrol, but obviously there are safety issues.
Grip: It depends what grip you are using Head: about 45in.
Golf grip tape is currently a generic product. There are many manufacturers of double sided sided tape. It is simply a way of attaching a golf grip to a golf club.
No, you can now blow them on with an air gun and compressor. But if you don't have this you can use petrol (gas), grip solvent or white spirit.
0.580"
shaft my hubby says its a grip
it is a taylor made golf shaft that has a smaller dia at the bottom of the grip .
You can use white spirit or petrol (gas if you live in USA I believe) but there are safety issues with these liquids so be careful.
There are three main parts, the head, the shaft and the grip.