Install a floating swimming pool skimmer
Skimmer net on a pole
They are usually attached with a hose to vac source & float on top.
You could get yourself a floating swimming pool skimmer. They hook up the same way as an ordinary automatic pool cleaner.They are an Australian pool cleaner known as either the dragonfly supper skimmer. or the pulse surfase cleaner. they are also available from a place in Texas dragonfly floating pool skimmer. othewise you have to use a net
With either a skimming net or get an effective floating pool skimmer
Measure from the skimmer box to the furthermost point away and add 2mt
You can buy a skimmer at Target for about $12.00. I have a small 10ft. pool and it works fantastic
A pool skimmer is generally built into the side of or around the top of a swimming pool in order to skim debris from the surface of the water. A pool filter is built into the plumbing in order to filter fine debris from the water itself.
The water will spill out through the skimmer, unless the skimmer it is blocked. Otherwise, it will spill over the top. It should not hurt the pool.
Most chemicals for swimming pools are applied directly to the water, not through the skimmer. The only exception to this rule is stabilizer (cya) which is poured directly through the skimmer and is a slow dissolving product. Pouring granular chlorine directly into the skimmer can cause an explosion within the plumbing and equipment due to the gas it creates as it dissolves.
A skimmer weir is the plastic flap and the opening of the skimmer. It traps leaves that are pulled into the skimmer when the pump is running and then holds the leaves in the skimmer whne the pump shuts down
The purpose is to keep the skimmed item (insects, leaves, etc.) in the skimmer, so when you create waves in the pool they don't wash back out in the swimming area.