This question depends on the type of boat you have. Normally as long as your boat can do around 25+ mph you should be able to pull a skier out of the water. So if you have a 18ft boat with a 115hp depending on the weight of the boat you will be able to tow a skier out of the water.
Pull the lower unit look into moter leg you will see th water pump on the shaft you may have to pull the shaft to get it but from ther its just bolts on the pump.
Assume you are talking about a boat and a water skier. Yes it will work. I have been towed by a 35 HP outboard. It depends on the skill of the skier to be able to get up quickly. It also depends on the skis and the drag they cause while being pulled from the water.
A sewing machine with at least a 2 hp motor is suggested for denim.
There are plenty of places in order for one to purchase an HP 4500 online other than using HP website. However, it is strongly suggested that one should order from the website Amazon.
There are plenty of places in order for one to purchase the HP 2230 laptop. However, it is strongly suggested that one should order from the website Amazon.
Yes, but not very fast.
I Think it is a chinese company. I suggested u that if u want to buy a laptop then u should purchase hp i3 2nd generation or hp ultrabook.
i have a 50 hp force on a 18 foot invader boat a i pull one just fine only shows problem when u have three or more on tube so have fun
Yes, with no problems at all.
There are plenty of places in order for one to get refills for HP black ink cartridges. However, it is strongly suggested that one should order from the website Amazon.
The minimum horsepower required to pull a skier on a 14-foot fiberglass boat typically ranges from 40 to 60 hp, depending on factors like the weight of the skier, the boat's load, and water conditions. A 40 hp engine might suffice for lighter skiers and calm waters, while a 60 hp engine would provide better performance and stability in various conditions. Always ensure the boat is rated for the engine size and consider safety and comfort when selecting horsepower.
For persons under 200 pounds, 70 hp would be the smallest motor I would reccomend. For persons over 200 pounds, a minimum of 90 hp. Of course the more horsepower, the easier it is to get the skier up and the less it wears out your skier!