What is the name of the international governing body of swimming?

Answer 1

Governing Body Of GymnasticsIn The U.S., the governing body for gymnastics is USAG, or USA Gymnastics. They oversee everything from the youngest girls in the lowest levels, to the most talented, highest level gymnasts.

Féderation Internationale de Gymnastique (FIG)

Answer 2

The Official governing body of Volleyball is known as the FIVB which simply stands for,

Federation Internationale De Volleyball.

The FIVB was founded on April 1947 in Paris when 14 countries representatives met in Paris to elect the president of FIVB.

FIVB was responsible for introducing Volleyball to the Olympics in the 1964 Olympics.

Answer 3

Dishwashers are some of the easiest appliances to repair. Most people become intimidated by all of the control panels, dials, and push buttons that they end up calling a repairman because they do not believe that they can do it themselves. The control panels are the only things that have changed in a dishwasher in over twenty years. It is the control panel that will be the only intimidating aspect of repairing a dishwasher. Most malfunctions in a dishwasher can be fixed by the owners themselves. No need to spend extra money on a repair service. The biggest reasons why a dishwasher will stop working is because one of the parts has malfunctioned, and needs to be replaced. If a person is unsure that one of the parts of the dishwasher is unusable they should take that part to a professional to have it tested. If the part needs to be replaced, a person can either decide to replace it, or have it repaired.

The power for a dishwasher usually runs on either a 115 volt, or a 120 volt of power. The water comes from the water heater, and any waste water is drained into the drain pipe. For best results, a dishwasher should be run at a temperature of 140 degrees while in motion. Any colder than this, and the dishes will not come clean, but any hotter, and it could ruin the dishwashers mechanism. Newer dishwashers will have a preheating model that will preheat water automatically, so the temperature will not have to be set for the newer dishwashers. Before performing any repairs, the water from the Plumbing system, and the electrical system must be turned off. This means that the water supply must be turned off in the main house, the unit must be unplugged, and the fuse for the circuit breaker must be turned off. This will prevent electrocution while working on the appliance.

The first step is to perform basic dishwasher checks to make sure the dishwasher is plugged in properly, check for blown fuses, or a tripped circuit. If those are not the problem, then test the switch with a voltage tester to make sure that the problem is not in the switching mechanism. The wall outlet is usually controlled by the switch. If this switch is not working, then it will need to be replaced. Check that the door to the dishwasher is latching when it closes. If it is not latching, then the latch will need to be cleaned, or replaced. Check the water heater to make sure it is working properly. If it is not the water heater, check the control panel and make sure all of the controls are working properly. Once all of these checks have been performed, then the person will have to look further into the cause of the dishwasher malfunction.

The sprayers, strainer, float switch, racks, and door latch all need to be checked to make sure they are not the problem. In order to get to any of the parts inside the dishwasher, it may have to be disassembled by removing the strainer, racks, and sprayers. The door to the dishwasher may also need to be removed in order to get to a part inside of the dishwasher. Other components that need to be checked are the door gasket, latch, switches, and the timer. The malfunction could be in any of these components, which will require only a minor fix. If water is leaking from the door that means it is the door gasket. Once the door gasket is fixed, and it is still leaking, check the door latch. If the latch is fine, then check the door switch. When the latch engages after it closes, it will engage the switch. If the dishwasher does not work after the latch is engaged, then the switch is faulty. The switch will have to be checked through a volt-ohm-milliammeter device which should be set to the RX1 scale. The VOM will need to be checked against each of the switches terminals. If they are all zero, then the switch is fine, if they are more than zero, then the switch is faulty and will need to be replaced.

If everything seems to be fine with the door latch, and switch, the floating switch will need to checked. The float switch is located at the bottom of the dishwasher unit. The bottom dish rack will need to be removed in order to get to the float switch. Make sure float switch is not stuck in place. If it is stuck, remove any debris that is around it. Remove the float switch with a screw driver, and the float switch will also need to be checked through a VOM device in the same manner as the switch was checked. If it reads zero, the float switch is fine, if it is more than zero, then the float switch is faulty and needs to be replaced.

Next step is checking the timer and the control switches. Most dishwasher malfunctions are caused due to a faulty timer. The timer is not a device that a person can fix on their own, so this will have to be taken to a professional to be repaired, or replaced. The timer can be checked with a VOM just like the switch and the floating switch. If it reads zero, it is okay, if it reads more than zero, it is faulty. The control switches can be checked in the same way with the VOM. If it reads more than zero, then the problem is in the control switch, and the control switch will need to be replaced. If a dishwasher does not fill up properly while washing dishes, or is not drying the dishes properly, then the dishwasher has a problem with a valve, or a heating element problem. If everything up to this point is fine with the dishwasher, the problem could be in the water inlet valve. The inlet valve controls the amount of water that flows into the dishwasher. The inlet valve is located at the tub of the dishwasher. Most problems with an inlet valve will be due to the screens being clogged. The valve will need to be cleaned. If the inlet valve looks damaged, it will need to be replaced.

Once all of these steps have been performed, and the dishwasher is still not working, the person will have to take it to a professional repair service because the problem is deeper than what most people can deal with.

Answer 4

Fédération Internationale de Natation (FINA) is the international governing body for swimming

Answer 5

Fina is the international governing body of swimming

Answer 6

what is the governing bodies for vollyball