Want this question answered?
To dive feet first, jump or step off the diving board with your arms extended above your head. Keep your body straight as you enter the water and aim to make minimal splash. Practice diving from a low height before trying it from a higher diving board.
buhb
The dimensions of an Olympic diving pool are usually 60 feet in length and 75 feet, 11 inches in width. It should be equipped with two 1-meter springboards, two 3-m springboards and a diving platform with three levels: 5m, 7.5m and 10m.
Hello The difference between an active low and an active high SR flip-flop is that with the active low SR flip-flop, the system is activated when the inputs to system are zeros while with the active high SR flip-flop, the system is activated when the inputs to the system are ones.
Active low (0-0.8v)
There are basically 2 major expenses for sky-diving: 1. Equipment: It can be rented or bought, high-tech or low-tech. If you only want to dive once, sign up with a place that includes equipment with the price of the jump. If you'll be a repeat jumper, you can buy your own equipment (which can run thousands of dollars) 2. The jump: Expect to pay between $75 and $250 depending where you go, whether equipment use is included, and the style of jump you do. This website has a lot of great information about sky-diving in general, including a little bit of price info. http://www.skydivingmagazine.com/faq.htm
Momentum affect jumping a great deal, that is why a standing long jump is significantly less that one taken at close to maximum speed. Usually the faster an athlete the longer he or she will jump, but jumping also depend not only on speed but also on how the athlete converts that speed in the last couple of strides. A jumper can negate their running speed by slowing down at the board, lengthening the strides at the board or by dropping the hips too low.
The term "active low" means that the input on an IC requires a logic low for it to be activated, i.e a low voltage (of course the voltage range is dependent on the technology, TTL, CMOS etc) Active high is the opposite... the input requires a logic high for it to be activated. A simple example to illustrate, an 8bit counter can count UP/DOWN this functionality is controlled with only one pin, an active high on that pin to count up or low to count down.
No, a substrate with low affinity will not stay long in the active site of an enzyme. This is because substrates with low affinity have weaker interactions with the active site compared to substrates with high affinity, resulting in quicker dissociation from the enzyme.
Active transport. To go "upstream" requires ATP, a form of energy, to pump against the ion gradient.
low to high
Yes. Active transport requires energy; it is transport from an area of low concentration to an area of high concentration. Passive transport doesn't require energy; it is transport from an area of high concentration to an area of low concentration.