13 mm would be most common. However, anything from 12 mm to 14 mm would still be considered standard.
It should be 13 mm or 14 mm.
The BCA Rules require that the tip be 9 to 14 mm in diameter and the tip must be made of leather to perform a jump shot. If a metal ferrule is used, it cannot exceed 1 inch in length. However, BCA tournaments may use WPA Rules. In this case, there is no cue tip minimum and the cue tip must be of leather.
The typical tip for a pool guy who opens your pool ranges from $20 to $50, depending on the size of the pool and the complexity of the job. If the service is particularly thorough or if you're a returning customer, you might consider tipping on the higher end of that range. It's also a good idea to factor in your overall satisfaction with the service provided.
No. The typical snooker cue tips are much smaller than the typical pool cue tips. So, you can fit a pool cue tip to a snooker cue, but not a snooker cue tip on a pool cue.
You should tip your pool cleaner the equivelent of one months service at Christmastime or the end of the year
Welding tip
yes, in ancient times people used the tip of their finger to measure out an inch. they also used the length from the tip their finger to the other tip of their finger to measure the persons height.
No. Other than both being cue sports, they are very different.
The best tip depends upon the player skill and type of play. If the tip is 14mm there is no reason to go softer than a medium tip. Using a soft tip for additional cue ball control should be limited to a tip of 13mm or smaller. A hard tip must be used for a break cue, but will take away from control for normal play. A hard tip is often used on house cues simply so it lasts longer. The brand of cue tip becomes a preference based on play that is a result of many thousands of hours of playing pool. The brand is unimportant to the average player - the hardness, curvature, and condition are important.
The size number on a gas torch tip refers to the diameter of the orifice. A size 0 tip has a smaller orifice diameter compared to a size 15 tip. This means that a size 0 tip will produce a smaller, more concentrated flame, while a size 15 tip will produce a larger, broader flame.
If you mean in mm, it is 25.4 mm and it is also approximately the distance between the tip of the thumb and the first joint of the thumb.
The tip is usually 1/2 to 1 inch big.