0
What else can I help you with?
Where does the water come from when backwashing a pool filter?
From the pool
How do you remove laundry detergent from swimming pool?
keep scooping, backwashing, scooping, backwashing. It has taken us all week to get rid of arm and hammer laundry deterent from our pool. Thought it was baking soda.
Do you shut off the inlet or the outlet when backwashing a pool?
When backwashing a pool, you typically shut off the outlet. This is because backwashing involves reversing the flow of water through the filter to clean it, and by closing the outlet, you prevent clean water from flowing back into the pool during the process. Always follow the specific instructions for your filtration system for best results.
Why is it important to rinse a sand filter after backwashing?
Because dirt and small sand will pass through the filter the first time it is run after backwashing. By rinsing you are sending that debris, which could cloud your pool, out of the backwash port instead of back into the pool.
Do you need to rinse after backwashing pool?
Yes. if you don't you may end up with a cloud of dust being washed back into the pool.
After backwashing a pool do you need to add earth back to the filter immediately?
Yes, after backwashing a pool filter you should add diatomaceous earth (DE) back to the filter immediately if you have a DE filter. If you have a sand or cartridge filter, there is no need to add anything after backwashing.
Can you backwash a public pool while people are in the pool?
No, it is not safe to backwash a public pool while people are in it. Backwashing can disturb the pool's water chemistry and filtration system, potentially releasing contaminants and affecting water quality. Additionally, the process can create a suction effect that may pose a risk to swimmers. It's best to schedule backwashing during times when the pool is closed to ensure safety and maintain water quality.
What should the pressure gauge read during backwashing a pool filter?
Around 10 PSI if you have a 2 horsepower pump. It will vary, depending on the restrictions in the exit line. Pool Masters
Really murky green water even after backwashing and running filter and treating with algeside?
shock pool its the only way to kill everything in water
How much DE do you use after back washing?
It is recommended to add about 1-2 cups of Diatomaceous Earth (DE) per 10 square feet of filter area after backwashing your pool filter. Be sure to follow the specific instructions for your filter model and size when adding DE after backwashing.
What square foot cartridge pool filter for 25000 gallons of water?
48 square feet will give you more than enough and reduce backwashing frequency.
Does water in a salt pool ever have to be replaced?
Only to replace what evaporates and gets splashed out. occasionally salt needs to be added as some is lost with backwashing splash out and overflow
