You'd want to paint the entire drum, which you can't while it is still inserted, so no.
spray spray paint all over the light and let it dry. nothing special.
it jams up
no u have to wipe the internals, sand it down nd then spray paint it. put at least 2-3 coats on it.
You need too remove the clip from the dart blaster. Then either sand it or Use Spray paint used only for plastics.
Take some sandpaper and just sand it right off. That's what I did, and it worked. :D
First of all I would not recommend painting a Nerf gun, I painted a $60 Nerf stampede and it doesn't work that well. However, if you are determined first get a krylon fusion for plastic can of spray paint, or multiple for more colors (krylon fusion is the most widely recommended paint for painting Nerf guns). Then take all the parts of your gun apart making sure to unscrew all the screws before attempting to take apart. Once apart sand it down so that the paint will stick then you simply pant your Nerf gun. If you wish to use more then one color spray paint the gun the the1st color then let it dry and then tape the parts off where you want that color to stay. Then you spray paint the remaining plastic (it's okay to get on the tape), then wait for it to dry then remove the tape and screw your gun back together.
Yes, you can. But, I would suggest buying a plastic-safe spray paint. I would recommend Krylon Fusion or Rustoleum paint. You can find these at your local hardware store, Michael's, or Home Depot. But, before you paint them, make sure to cover the trigger, and other parts so they won't get paint on them(the trigger could get stuck). Also, cover up the orange nozzle because that's how the police know it's a fake/nerf gun.
YES!!! u can paint Nerf guns but you have to get the right paint and it also has to be plastic paint. if you do paint a Nerf gun it could come come off onto your hands, it all depends on the quality of the paint
You will need: 1. Masking tape 2. Spray paint (black is best,use primer) 3. Lots of space 4. Some news paper to put down so the spray paint doesn't go everywhere. Get the tape and tape: 1. The tip of the barrel 2. All of the handle( Inc the trigger) 3. Tape all the buttons and some parts of the mag Then paint
spraypaint it if that's what your looking for
Yes, you can paint foam. Although I wouldn't paint the handle, it could rub off on your hands and get... icky.