PROM
By using the appropriate programmer for the chip. See related links for the MPLAB PM3 Universal Device Programmer.
Stephen Blank goes by Chip.
The "chip" or programmer should have that listed on the package.
Chip ID
To use the Willem EPROM programmer, first, ensure it is properly connected to your computer and powered on. Install the necessary software on your computer, often provided with the programmer, and select the appropriate device from the software interface. Insert the EPROM chip into the programmer's socket, making sure it is oriented correctly. Finally, follow the software prompts to read, write, or erase the EPROM as needed.
It is the idle time when no cutting is taking place. The bigger picture is , to take the total idle time and express it as a percentage of the cycle time. The idea is to get this percentage as small as possible. It is use full on multi slide or multi turret machines where the cutting of two tools can overlap and so reduce chip to chip time. The programmer determines the chip to chip time . The smaller the chip to chip time the smarter the programmer. Efficiency and productivity improves
Yes it can, depending on your driving habits.
not from the factory, maybe an aftermarket chip, cpu, programmer
Microcode.
the correct answer is Microcode
Flash Memory
Called Microcode