It is generally called "Chip Creep".
Gravity
chip creep
chip creep
It can be caused by GRAVITY as in the case of old lead pipe sagging. In addition copper contact wires in electrified transport systems sagging under permanent stress causes creep.
Press down with a screw driver on all corners of the socketed chip on the card. This problem occurs because of thermal changes and is called chip creep.
It can be caused by GRAVITY as in the case of old lead pipe sagging. In addition copper contact wires in electrified transport systems sagging under permanent stress causes creep.
No, a creep meter measures horizontal movement along a fault line caused by tectonic forces. It is used to monitor slow, continuous creep along faults, which can help scientists better understand the strain accumulation and potential for seismic activity in an area.
the consequence of creep not allowing the mosquito to bite the king was that he bit the king before he was asleep which caused him pain then the guards searched for the victim and killed the louse
The future tense of "creep" is "will creep" or "is going to creep."
While properly grounded (to prevent static electricity buildup and damage to the electronic components) gently push downward on the chip. Added 1 Dec 08: Remove the card from the expansion slot and use a screwdriver to press down firmly on each corner of each socketed chip on the card. Chips sometimes loosen because of thermal changes; this condition is called chip creep. pg. 422
of Creep, of Creep, imp. & p. p. of Creep.