I'm assuming you have a Marlin model 1889, not 1887, as they never made a model 1887. The 1889 does have a patent date of 1887 on the barrel, so this is a common mistake. Any Marlin marked ".32W" on the barrel will normally be chambered for the .32-20 Win. cartridge.
Yes it does, unless your barrel is stamped .223 .
It should be marked on the barrel.
as long as there are no cracks in the barrel, yes. it simply means not to shoot slugs thru the barrel.
Have it checked out by a competent gun smith.
A Marlin model 60 should only be shot with 22 long rifle ammunition. It should be marked on the barrel or receiver and may say 22LR.
No. Only what is stamped on the barrel.
DO NOT ATTEMPT TO FIRE MODERN AMMUNITION until a good gunsmith checks it out.
Yes
The sizes of shells it accepts will be stamped on the barrel
Have a gunsmith check the gun before you fire it.
It should fire until the water gets inside the ammunition and degrades the gun powder. If the ammunition is well sealed against moisture then it will shoot until the barrel clogs or the action rusts.
I've never seen a Colt AR-15 which didn't have a 5.56x45 chamber. The barrel should be stamped "5.56x45 1 in 7" (or "1 in 9", depending on the rifling pitch).