Yes, most Spyder parts are universal on their markers.
The max velocity of a MR1 Spyder paintball gun is typically around 250-300 feet per second (fps). However, the exact velocity can vary depending on factors such as the type of paintballs being used and the air pressure setting on the gun. It is important to always check and adjust the velocity to comply with safety regulations at the paintball field.
you cant, sorry
In U.K, the paintball fields set them at 270 FPS, but when you buy the gun it should be around 300 FPS, you can buy chrongraphs for $10-20 to test the FPS,
depends on how you adjust it, most guns come in with a factory setting at 250 fps
You can adjust the marker by turning the velocity screw. It is in a different place for every gun. This changes the FPS.
it will begin to over heat at tmes pull the thermostat and boil it if it dose not open it is bad
For a rifle that fires between 800 & 1000 FPS you should set your target at 60 feet. You will have to adjust for rifles that shoot at a slower FPS.
Esprit makes handbags
Thy spyder agressor and alpha black have very different internal parts and are ergonomically different. While The tippmann marker is a cast aluminum, split receiver, the spyder is milled aluminum, with parts that unscrew from the back. They will both shoot 300 fps at about the same rate without modification. The spyder has no forward grip and is a centerfeed (hopper is in the center). The Alpha black is larger with a handguard.
Jacques Esprit died in 1677.
Jacques Esprit was born in 1611.