Make sure the keys are out of the ignition first. Then check to see if your vehicle has any braces holding it in place. Once you've taken any braces off, disconnect the ground wire(black), it useally takes a 1/2 inch wrench. Then take your hot wire off(red). These are all the workings of a person being self sufficient. Good luck.
An automotive engineer will be designing the mechanics, placement, operation of the system.
An automotive technician will be the person doing general repairs to cars in a garage.
1. Press the "Menu" button on the Driver Information Center until the display says "Oil Life Reset".
2. Press the "Enter" button to acknowledge the reset.
3. Oil Life will now read 100%.
Horns are typically at the front of the engine capartment, left or right of the radiator, there are twop (a high and a low pitch) for the 2001 Firebird, not sure if they are in the same location
how do you replace the water pump on Cadillac cts 2004 3.6
On the back of the engine (passengers side) directly under the intake manifold
By the way, the same is true for the 2002 model; passengers side, directly under the intake manifold
I believe it is when people agree with or become a fan of something because it is performing well, as in sports, or is popular.
The 2007 Cadillac CTS has a 9 ft. 5.4 in. (113.4 in.) wheel base.
You question is wierd. If your asking is CTS a company, yes it is. They make parts for the automotive industry. If your referring to Cadillac, then CTS is a model. Its their midsize luxury performance vehicle.
The 2004 Cadillac CTS has a 9 ft. 5.4 in. (113.4 in.) wheel base.
No. In 2004 GM introduced a new type of computer comunications called GM LAN. The 2004 cts won't be able to comunicate properly with the 2003 radio, although some functions will work.
SIDI in automotive, stands for "Spark-Ignition Direct-Injection" which is a type engine by GM. An example is Cadillac CTS 3.6 SIDI. It produces more horsepower and torque than a PFI engine (Port Fuel Injection).
The gas tank on the 2008 Cadillac CTS holds 18.0 gal..
Depending on finish of steel and stock plus wear, it could range from 800 up to 2000
1. The a/c compressor is notengaged.
2. The a/c compressor is damaged internally.
3. The a/c service port is bad.
4. The a/c service hose is not depressing the schrader valve................