Want this question answered?
Be notified when an answer is posted
To make a Beyblade tip is easy, but you will need an existing tip to make a new one. You will need an L-Drago tip or a Thermal Liserta tip. 1) Cut off the bottom part of the tip. 2) Take a launcher and unscrew the screw from it. 3) Use the screw driver to make the hole bigger, and screw on the screw. You now have a stamina/attack tip.
put a 1cm screw in the performance tip
You can sharpen the tip of your Beyblade by lightly sanding it with fine sandpaper or using a sharpening tool designed for Beyblade tips. Be careful not to remove too much material, as this can affect the performance of the Beyblade. Regular maintenance of the tip can help keep it sharp.
take off the broken botton and put an eraser from a pencil resize it if needed
SD (Semi defense)
Yes, it has the quake performance tip, and that has a slit in it.
try bearing oil or skate wax and then sharpen the tip
To make a Beyblade spin for a longer time, you can launch it with more power, adjust the launch angle to minimize friction with the stadium, and ensure the Beyblade is well balanced. Additionally, using a high-quality, well-maintained tip can also help it spin longer.
you have to switch the tip with a beyblade that has alot of stamina on its tip i would probbaly switch the tip with dark wolf becaus when i switch the two tips it spins faster and longer hope this helped you!
To assemble a Beyblade, locate the base, the energy layer, the forge disc, and the performance tip. Slide the energy layer into the base, attach the forge disc on top of the energy layer, and finally, place the performance tip at the bottom of the base. Make sure all parts are securely in place before launching the Beyblade.
The SF performance tip was first introduced with the beyblade Flame Sagittario C145S. It features a sharp flat tip that provides aggressive movement and good stability during battles.
you don't. ;) MY OPINION====== I've never heard of an answer posting troll, until now, but you can cut a piece of paper, fit a solid underneath as a tip and make sure it fills up to the middle,place a metal fusion wheel in there, and sellotape it all together.