answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is the standard thread size for archery inserts?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the standard thread length on a pipe?

americanNPT pipe thread i want how much taper it has depends on the pipe size/diameter


What size pedal thread does the standard 1 piece crank use?

One-piece cranks use 1/2" thread


What size pedal thread does the standard 1-piece crank use?

One-piece cranks use 1/2" thread


Sae and metric What is the difference?

SAE is American or standard thread and metric is everything else. The size or diameter is different and the pitch of the thread is different also.


What is the thread size on a standard hose bib?

3/4" garden hose threads (GHT).


What is the thread size for a Dufferin Phantom cue sneaky pete with a target joint?

Dufferin did not always use the same thread as a standard but it should be a 3/8 - 10.


What is the transmission drain plug size hex key for a 1994 Toyota Camry?

18 mm standard thread.


Is there a standard thread size for 22 rifle barrels?

Yes. 1/2 x 28 TPI RH


What is the thread pitch for a 1971 Chevrolet Chevelle?

All thread pitches are standard inch size thread pitches. I can't be more specific than that since I don't know exactly which bolt you are talking about. An example for you is the starter bolts are a 3/8-16 pitch, which is standard coarse thread. Most body panel bolts are either 5/16-18 or 3/8-16 pitch, once again, standard coarse thread pitches.


What socket size is required for a three quarter inch bolt?

Bolts are categorised by their thread size. The standard socket size for a bolt with a three quarter inch thread is 1 and one eighth inches. Heavy head bolts use a one and a quarter inch socket.


What is micrometer screw?

The ANSI B1.11 Microscope Objective Screw Threads standard covers the single screw thread size: 0.8000"-36 AMO. The standard lays out the screw thread parameters and the parameters for screw thread gauging. There is some mis-information published on the web related to this screw thread which is corrected at this webpage: http://www.ring-plug-thread-gages.com/ti-spec-ANSI-ASME-B1.11.htm


What is the Winchester model 90 barrel thread size?

What is the thread size for a Winchester Model 90?