0
What else can I help you with?
Why ballpen is compound?
either way is correct
What way do you turn the screw on the bow of the violin to loosen it?
Depends on the bow. A compound bow has dials which you can use to either tighten of loosen it. Recurves and longbows are impossible to loosen;(
What is the correct name for the compound NH42S?
The correct name for the compound NH4S2 is ammonium sulfide.
What is the correct way to store fresh fish?
Upside-down
What is the correct name for the compound (NH4)2S?
The correct way you should have wrote this is (NH4)2S and the compounds name is Ammonium Sulfide.
How do you re-string a compound bow?
To re-string a compound bow, you must first get the bow limbs to bend. The easiest way (and the safest) is to place the bow, with the string above the bow (it will look like a smile) in what is called a "bow press". Once the bow is in the press, it is pushed down to bend the limbs ("compressed"), causing the string to go slack; the string is now removed from the cams and the new string is installed. De-compress the bow and remove it from the press.The bow press can be somewhat expensive to purchase, so it may be best to take the bow to an archery shop and have the string replaced there. Due to the amount of pressure required to bend the bow's limbs, as well as the need to keep them bent while changing the string, attempting to restring a compound bow without the proper equipment is definitely not recommended.
You bought a used bow the draw length is 30 but you are a 27 can the bow be adjusted for 27?
If it is a compound bow, the type of bow with the pulleys or "wheels" at the ends of the bowlimbs, there should be some way to adjust the draw-length of the bow itself; it may be best to consult someone at an archery shop for the best way to make such an adjustment. When using a Traditional bow -- a recurve or longbow, or other non-compound type -- the only "adjustment" is to simply pull the string back (in this case) to 27 inches; reducing the draw-length in this way also reduces the effective draw-weight of the bow. Also, when using a Traditional bow, and the archer has a longer draw-length than the bow is rated for (i.e., the archer's draw-length is 30 inches, but the bow is rated at 27 inches), it is always advisable to make sure the bow is designed to withstand the longer draw-length. Failure to do so can result in the catastrophic failure of the bow, and possibly serious injury to the archer. Increasing the draw-length of a traditional bow will also increase the effective draw-weight of the bow.
Which is the correct way to doin prefix pro proper adjective European?
The correct way to form the compound adjective for "European" with the prefix "pro" would be "pro-European."
How do you adjust a Pearson renegade bow?
A Pearson Renegade compound bow may be adjusted by tightening the limb bolts. These bolts will help adjust the weight of the bow. The bolts are hexagonal and need to be rotated in the same manner - the top and bottom. The best way to adjust the bow is to take it to a shop that specializes in archery so they can properly adjust the weight.
How can you store a highly reactive compound so that it will not react?
One way to store a highly reactive compound is to keep it in an inert atmosphere, such as nitrogen or argon, which prevent the compound from reacting with the surrounding air or moisture. Another method is to store the compound in a dark, cool place away from sources of heat or light that could trigger a reaction. Additionally, storing the compound in a tightly sealed container can help prevent it from reacting with other substances.
The best and safest way to put a string on a bow is to use the?
bow stringer
What is the homograph of bow?
The homograph of "bow" is a word that is spelled the same way but has different meanings, such as "bow" as in a type of weapon or "bow" as in bending forward in respect.
