take it into a bow professional store and have them change it becase u could ruin your bow if you do it wrong or it could blow up litterally blow up
50-70
I have a 1989 Browning Accelerator Plus and I was wanting to adjust the draw length?
The draw weight should be marked on the bow. You cannot go any higher than the marked draw weight unless your bow has removable limbs, then you could buy limbs with a higher draw weight. You will ruin the bow if you use it with a higher draw rate.
****Answers**** Every bow you should be able to adjust that.
im at the library
String is 98.5 and cable is 41.5 It varies by draw length, this is for 28" draw
The draw weight is adjusted by tightening or loosining the screws that hold the limbs in their pockets attached to the riser.
To adjust the Brushmaster compound bow, start by adjusting the draw weight using the limb bolts located at the ends of the limbs; turning them clockwise increases the weight, while counterclockwise decreases it. Next, set the draw length by adjusting the cam system, ensuring it’s suited to your arm length for optimal comfort and performance. Finally, fine-tune the sight and stabilizer as needed for accuracy. Always make adjustments gradually and test the bow to ensure it meets your preferences.
It depends on the draw weight of the bow, and the weight of arrow you use
If it is a compound bow, the type of bow with the pulleys or "wheels" at the ends of the bowlimbs, there should be some way to adjust the draw-length of the bow itself; it may be best to consult someone at an archery shop for the best way to make such an adjustment. When using a Traditional bow -- a recurve or longbow, or other non-compound type -- the only "adjustment" is to simply pull the string back (in this case) to 27 inches; reducing the draw-length in this way also reduces the effective draw-weight of the bow. Also, when using a Traditional bow, and the archer has a longer draw-length than the bow is rated for (i.e., the archer's draw-length is 30 inches, but the bow is rated at 27 inches), it is always advisable to make sure the bow is designed to withstand the longer draw-length. Failure to do so can result in the catastrophic failure of the bow, and possibly serious injury to the archer. Increasing the draw-length of a traditional bow will also increase the effective draw-weight of the bow.
To adjust the Indian IX Bushmaster compound bow, start by adjusting the draw weight using the limb bolts located at the ends of the limbs. Turn the bolts clockwise to increase weight and counterclockwise to decrease it. For draw length adjustments, you may need to modify the cam system or use different modules, following the manufacturer’s guidelines. Always ensure to check the bow's specifications and make adjustments gradually for optimal performance.
38"